Archives: Products

Showing 6577–6592 of 23773 results

20.0mm 2FL STANDARD CARBIDE SLOT DRILL
Rp2.545.000

Sherwood Milling Cutters Plain Shank Carbide Micrograin – 2 Flute

Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

Read more
20.0mm 2FL STANDARD CARBIDE SLOT DRILL
Rp2.295.000

Kennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Metric

2 Flute: Regular Series – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Read more
20.0mm 3FL STANDARD CARBIDE SLOT DRILL

Kennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric

3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Read more
20.0mm 3FL STANDARD CARBIDE SLOT DRILL
Rp2.921.000

Sherwood Milling Cutters Plain Shank Carbide Micrograin – 3 Flute

Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

Read more
20.0mm 45DEG M/FLUTE HI-HELIX END MILL Q-COAT

SwissTech Carbide Plain Shank End Mills High Helix

Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
EHQ-6*PR Carbide Q-Coat.
*Number varies according to the number of flutes.

Series 72 – Regular Length

Read more
20.0mm 4FL BALL NOSE CARBIDE END MILL
Rp3.923.000

Sherwood Solid Carbide Micrograin Plain Shank End Mills 4 Flute Ball Nosed

Regular Series
For maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

Read more
20.0mm 4FL L/SERIES CARBIDE END MILL

Kennedy Carbide Micrograin Plain Shank Slot Drills, 4 Flute – Long Series, Metric

Long Series – 4 Flute – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Read more
20.0mm 4FL STANDARD CARBIDE END MILL
Rp3.636.000

Sherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute

Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080

Read more
20.0mm 4FL STANDARD CARBIDE END MILL
Rp3.825.000

Kennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric

4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.

Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080.

Read more
20.0mm DIA DEEP POT MAGNET

Kennedy Deep Pot Magnets

North polarity in centre separated from opposing pole by a continuous slot. Ideally suited for gripping applications. Supplied with M5 x 1 threaded bore fixing hole and keeper.
*M3 x 0.5

Read more
20.0mm ST/SH FINE ROUGH END MILL Q-COAT

SwissTech Carbide Plain Shank Ripper Fine Pitch: Series 82, Regular Length – Carbide Q-Coat

Centre cutting.
To Manufacturers standards.
Cutting diameter to e8.
Shank diameter to h6.
RFQ-3*PR Carbide Q-Coat.
*Number varies according to the number of flutes.

Series 82 – Regular Length
Dimensions to DIN 844.

Read more
20.0mm ST/SH SHORT 2FL CARBIDE SLOT DRILL

SwissTech Carbide Plain 2 Flute Shank Milling Cutters: Series 45, Short Series – Uncoated

Series 45 – 2 Flute – Short Series
Dimensions to DIN 6535 HA. Centre cutting.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
20.0mm ST/SH SHORT 2FL CARBIDE SLOT DRILL – TICN

SwissTech Carbide Plain 2 Flute Shank Milling Cutters: Series 45, Short Series – TiCN Coated

Series 45 – 2 Flute – Short Series, TiCN Coated
Dimensions to DIN 6535 HA. Centre cutting.

Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

Read more
20.0mm ST/SH SHORT 3FL CARBIDE SLOT DRILL

Carbide Plain Shank Milling Cutters – Series 48
3 Flute – Short Series – SDC-3PS Carbide

Centre cutting. To Manufacturers Standards.

HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.

Series 48
3 Flute – Short Series
SDC-3PS Carbide

Read more
20.0mm ST/SH SHORT 4FL END MILL Q-COAT

Carbide Plain Shank End Mills 4 Flute – Series 66 – Short Series – EMQ-4PS Carbide Q-Coat

Series 66 – Short Series
Dimensions to DIN 844. Centre cutting. To Manufacturers standards. Cutting diameter to h10. Shank diameter to h6. EMQ-4PS/L Carbide Q-Coat.

‘Q-Coat’ Coating has been specifically developed to give carbide cutters the ‘edge’ when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

Read more
20.0mm ST/SH SHORT CARBIDE END MILL

Carbide Plain Shank Milling Cutters – Series 50
4 Flute – Short Series – EMC-4PS Carbide

Centre cutting. To Manufacturers Standards.

HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.

Series 50
4 Flute – Short Series
EMC-4PS Carbide

Read more