Archives: Products
Showing 5665–5680 of 23773 results
-
180x22mm F/GLASS ZIRC FLAP DISC P40Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x22mm F/GLASS ZIRC FLAP DISC P60Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x22mm F/GLASS ZIRC FLAP DISC P80Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x32x13mm SPARK RESISTANT WEDGE Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Wedges
Wedges
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
180x3mm (7″x1/8″) TAPER PUNCHRead moreAir Tool Chisels with 0.401â Shank
For all brands of portable air chisels including CP, Desoutter, Kobe, Toku and YK.
-
180x3x22.23mm A24RBF DPCCUTTING DISCRead moreType 42 Depressed Centre Cutting
Type 42 Depressed Centre Cutting
For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.
Grade A24/A46 – For general purpose cutting on metals.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
180x3x22.23mm A24RBF FLAT CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
180x50x1050mm ICE BREAKERRead moreSnow Shovels & Ice Breaker
Manufactured from impact resistant ABS plastic with a hard wood shaft and plastic D-grip handle. They incorporate a moulded recess in each shovel pan for easy stacking.
Small:
Overall length: 345 x 310 x 850mm.
Medium:
Overall length: 395 x 309 x 1170mm and has a metal wear strip.
Large:
Overall length: 465 x 370 x 1200mm and has a metal wear strip.Aluminium Shaft
Lightweight aluminium shaft with a plastic sleeve and has a metal wear strip.
Dimensions (W x D x H): 465 x 370 x 1300mm.Telescopic
This small shovel is ideal when clearing small surfaces. It is light and strong with a telescopic shaft which is perfect to be used as a car shovel.
Dimensions (W x H): 310 x 700 – 840mm.Ice Breaker
Designed to break up ice and compacted snow, robust steel blade fitted with a wooden shaft and plastic PY handle. Once the compacted snow or ice has been broken up, a snow shovel can be used to move the loosened snow/ice. Dimensions (W x D x H): 180 x 50 x 1050mm. -
180x50x19mm SPARK RESISTANT WEDGE Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Wedges
Wedges
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
180x6x22.23mm A30TBF DPCGRINDING DISCRead moreDepressed Centre & Flat Reinforced Cutting & Grinding Discs
Type 27 Depressed Centre Grinding
For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.
Optimum angle for use 25 to 35°.
Grade A30/AS30 – For general-purpose use on metals.
INOX – For use on stainless steel (iron, chlorine and sulphur free).Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
1814 LOCKPIN SCREWRp113.000Read moreIndexa Indexable Tooling Spares – Spare Parts
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you’re using.
-
1838x457mm D/S FREE STANDING LOUVRE RACK D/GY,L/GYRead moreMatlock Free Standing Racks
Available in two heights and two widths. Made from 16swg channel section which supports louvre panels either single or double sided.
Colour: dark grey/light grey.S/S = Single Sided. D/S = Double Sided
-
1838x457mm S/S FREE STANDING LOUVRE RACK D/GY,L/GYRead moreMatlock Free Standing Racks
Available in two heights and two widths. Made from 16swg channel section which supports louvre panels either single or double sided.
Colour: dark grey/light grey.S/S = Single Sided. D/S = Double Sided
-
1838x871mm D/S FREE STANDING LOUVRE RACK D/GY,L/GYRead moreMatlock Free Standing Racks
Available in two heights and two widths. Made from 16swg channel section which supports louvre panels either single or double sided.
Colour: dark grey/light grey.S/S = Single Sided. D/S = Double Sided
-
1838x871mm S/S FREE STANDING LOUVRE RACK D/GY,L/GYRead moreMatlock Free Standing Racks
Available in two heights and two widths. Made from 16swg channel section which supports louvre panels either single or double sided.
Colour: dark grey/light grey.S/S = Single Sided. D/S = Double Sided
-
185mm/7.1/2″ LINESMANS PLIERSRead moreSenator Heavy Duty Linesman’s Pliers
Heavy-duty standard manufactured from chrome vanadium steel with a satin finish. Serrated jaws for gripping nuts, bolts, studs etc. Side cutting for wire up to 1.6mm diameter. Also with serrated gripping and crimping jaws behind the head.