Archives: Products
Showing 5649–5664 of 23773 results
-
180mm/7″ M/PILE POLY. PAINT ROLLER SLEEVE EMULSIONRead moreEconomy Refill Sleeve
Medium pile is suitable for smooth surfaces. Long pile is suitable for rough surfaces.
To fit SENATOR 180mm & 230mm wide bird cage pattern rollers. -
180mm/7″ PLASTIC PAINT ROLLER TRAYRead morePaint Tray
180mm (7â) Paint Tray
Evenly coats the roller whilst storing paint in the reservoir. The drain-off area helps remove excess paint from the roller preventing drips. -
180mm/7″ PRO-TORQ COMB PLIER 1000V INSRead morePro-Torq Insulated Pliers: Combination Pliers
Insulated Combination Pliers
Especially suitable for production line environments where repetitive work is undertaken. Double polished head and joint with induction hardened cutting edges. -
180mm/7″ S/STEEL NEEDLE NOSE PLIERSRead moreStainless Steel Pliers & Cutters
Manufactured from heat-treated stainless steel. Hardness: pliers: 42 – 45HRC; nippers: 45 – 48HRC. Used for delicate, fine and accurate work in a continuous production environment. With cushioned foam safe-grip handles for user comfort and control. Spring-loaded return for quick repetitive opening and operator comfort.
Cushioned foam safe-grip handles for user comfort and control. -
180mm/7″ SHEET METAL CLAMPRead moreSheet Metal Clamp
The wide jaws distribute the clamping force evenly to prevent damaging the workpiece being handled.
-
180mm/7″ STRAIGHT JAW GRIP WRENCHRead moreKennedy Grip Wrenches: Straight Jaw
Straight Jaw
For general-purpose gripping.
Rolled chrome vanadium steel bodies, drop forged hardened steel jaws with corrosion-resistant bright nickel coating. The jaw opening and clamping pressure can be adjusted with the knurled head screw, fitted with wire spring to ensure efficient opening of the jaws. The locking mechanism holds the wrench in place once adjusted, leaving both hands free. -
180mm/7″ STRAIGHT JAW HIGH STRENGTH GRIP WRENCHRead moreSenator Straight Jaw Grip Wrenches
Senator high strength grip wrenches bodies are manufactured from rolled chrome vanadium steel with serrated drop forged hardened steel jaws for a positive high strength grip every time! The body of the grip wrench is coated with a corrosion resistant bright nickel finish and the jaw opening and clamping pressure can be adjusted as required turning the knurled head screw adjuster. Each wrench is fitted with a wire spring to ensure efficient jaw opening. The locking mechanism holds the wrench in place once adjusted, leaving both hands free!
-
180mm/7″ STRT JAW BI-MATERIAL HANDLE GRIP WRENCHRead moreKennedy Straight Jaw Bi-Material Handle Grip Wrenches
Rolled chrome vanadium steel bodies, drop-forged hardened steel jaws with corrosion-resistant bright nickel coating. The dual material handle design allows the user to apply the greatest force with the minimum amount of effort. The jaw opening and clamping pressure can be adjusted with the knurled head screw, fitted with wire spring to ensure efficient opening of the jaws. The locking mechanism holds the wrench in place once adjusted, leaving both hands free.
-
180×1.6×22.23mm AS46 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
180x12mm (7″x1/2″) BUSHING SPLITTERRead moreAir Tool Chisels with 0.401â Shank
For all brands of portable air chisels including CP, Desoutter, Kobe, Toku and YK.
-
180x12mm (7″x1/2″) SPOT WELDRead moreAir Tool Chisels with 0.401â Shank
For all brands of portable air chisels including CP, Desoutter, Kobe, Toku and YK.
-
180x12mm (7″x1/2″) STRAIGHT PUNCHRead moreAir Tool Chisels with 0.401â Shank
For all brands of portable air chisels including CP, Desoutter, Kobe, Toku and YK.
-
180x22mm ALUM/BACK AL/OXFLAP DISC P40Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging and providing constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Aluminium-Backed (General-purpose).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x22mm F/GLASS AL/OX FLAP DISC P36Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x22mm F/GLASS AL/OX FLAP DISC P40Read moreHigh Performance Flap Discs
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
Aluminium Oxide Grade Glass Fibre-Backed (General-purpose, non-scratch).
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
180x22mm F/GLASS ZIRC FLAP DISC P36Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm)