Archives: Products
Showing 5537–5552 of 23773 results
-
17mmx19mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
17mmx21mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
17mmx70mm HEX BIT SOCKET1/2″ SQ. DR.Read moreYamoto Screwdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2â square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
17x19mm RING CRESCENT WRENCHRead moreKennedy Ring Crescent Wrenches
Chrome vanadium steel with satin chrome finish. Heads conform to DIN 838.
-
18 x 11 x 300mm RECTANGULAR KEY STEELRead moreKennedy Industrial Key Steel – Rectangular: Metric
Rectangular â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
18 x 19mm DOUBLE ENDED SWIVEL SOCKETRead moreKennedy Swivel End Socket Wrenches
Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point). Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.
-
18-35mm DIAL BORE GAUGERead moreOxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mmType – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″ -
18-48mm 45 DEG TIP REVERSIBLE CIRCLIP PLIERRead moreKennedy Reversible Circlip Pliers: 45° Angled Jaw
45° Angled Jaw
These straight and bent nose pliers are reversible for both internal and external circlip insertion and removal, made from high grade carbon steel with comfortable insulated handles. -
18-48mm STRAIGHT REVERSIBLE CIRCLIP PLIERRead moreReversible Circlip Pliers: Straight Jaw
Straight Jaw
These straight and bent nose pliers are reversible for both internal and external circlip insertion and removal, made from high grade carbon steel with comfortable insulated handles. -
18-908 SIZE A SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18-910 SIZE 1 SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18-912 SIZE 2 SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18-914 SIZE 3 SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18-916 SIZE 4 SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18-922 SIZE 5 SUPER PLASTIC HAMMERRead morePlastic Faced Hammers
Malleable iron head, fitted with two white high molecular weight polythene striking faces for high impact applications.
-
18.0 42DEG WELDON STD HIGH HELIX 2FL S/DRILL-8% CORead moreSwissTech HSS-Co 8% Weldon Shank 42° High Helix Slot Drills 2 Flute For Aluminium: Series 15, Regular – Uncoated
Series 15 – Regular Length
Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Shank cutting diameter to +0.04 -0.0.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).