Archives: Products
Showing 5057–5072 of 23773 results
-
160 P20/P30 BRAZED TOOLRead moreKennedy Cranked Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
1605 LEVER SCREWRp73.000Read moreIndexa Indexable Tooling Spares – Lever Screws
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you’re using.
-
1606 LEVER SCREWRp65.000Read moreIndexa Indexable Tooling Spares – Lever Screws
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you’re using.
-
1608 LEVER SCREWRp81.000Read moreIndexa Indexable Tooling Spares – Lever Screws
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you’re using.
-
160mm B/H SWIVEL CASTOR B/R TYRE & BRAKERead moreBlack Rubber Tyre Steel Centre Wheel with Roller Bearing – Swivel-Type with Bolt Hole
Zinc Plating Castor housing. For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with ‘cushioned’ tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20°C to +60°C.
-
160mm B/H SWIVEL CASTOR BLK RUBBER TYRERead moreBlack Rubber Tyre Steel Centre Wheel with Roller Bearing – Swivel-Type with Bolt Hole
Zinc Plating Castor housing. For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with ‘cushioned’ tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20°C to +60°C.
-
160mm BLACK RUBBER TYRE STEEL CENTRERead moreBlack Rubber Wheel Only
For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with “cushioned” tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 60C.
-
160mm CV PLIER & DIAGONAL CUTTER SET 3-PCERead moreKennedy 3-Piece Professional Quality Chrome Vanadium Plier Sets
Contents: Snipe Nose 160mm, Diagonal Cutters 160mm, Combination 160mm.
-
160mm CV PLIER SET 3-PCE BI-MATERIAL GRIPRead moreYamoto Chrome Vanadium 3-Piece Plier Sets
3-Piece Plier Sets
Manufactured from industrial quality chrome vanadium steel, chemically blacked with laser etched markings and bi-material grips. -
160mm HARD INSIDE LATHE CHUCK JAWSRead moreIndexa Lathe Chuck Jaws – Hard Jaws: Inside
Hard Jaws – Inside
For self-centring lathe chucks (IND-475) – Indexa 3200 and 3500. Chuck jaws supplied in sets of 3. -
160mm POLY FUNNEL ANTI-SPLASH RIM OFFSET SPOUTRead morePlastic Funnels
With anti-splash rims, removable brass filter, integral handle and rigid offset or 300mm detachable flexible spout. 160mm diameter.
-
160mm POLYETHYLENE FUNNEL WITH ANTI-SPLASH RIMRead moreKennedy Heavy-Duty Plastic Funnels
With anti-splash rims.
-
160mm T/P SWIVEL CASTOR RUBBER TYRE BLACKRead moreBlack Rubber Tyre Steel Centre Wheel with Roller Bearing – Swivel-Type with Top Plate
For smooth running with heavier loads. Suitable for use on most surfaces and for humid environments where medium harsh chemicals may be present. Quiet running with ‘cushioned’ tyre. Not recommended for use where mineral or organic acids are present.
Operating temperature range -20°C to +60°C. -
160mm XP-45C FACE-HOG MILLING CUTTERRead moreXP-45C âFace Hogâ Milling Cutters
Super Positive 45° approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Clamp style insert pocket with shim seats to protect the body in case of accident. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear.
Through coolant as standard. -
160mm XP-45C HI-SHEAR FACE MILLRead moreXP-45C âHi Shearâ Milling Cutters
Super Positive 45° approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Torx screws allow for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear.
Through coolant as standard. -
160mm/6.1/4″ DIAGONAL NIPPERSRead moreYamoto Diagonal Cutting Nippers
Industrial quality chrome vanadium steel, chemically blacked. Designed to give added strength at the point and allow hard wire to be cut without damaging the edge thus giving prolonged life. Bi-material grips.