Archives: Products
Showing 5041–5056 of 23773 results
-
16″ EXTENSION TUBE FOR 4T COLLISION REPAIR KITRead moreSpare Parts for Hydraulic Body Repair Kits
Body Repair Kit Spares to suit Kennedy Hydraulic Body Repair Kits
-
16″ HEAVY TEE HINGE (PR)BLACKRead moreTee Hinges (Supplied as pairs)
For high load applications such as for domestic gates and doors. Material thickness up to 3mm.
-
16″ HEAVY TEE HINGE (PR)GALVANISEDRead moreTee Hinges (Supplied as pairs)
For high load applications such as for domestic gates and doors. Material thickness up to 3mm.
-
16″ KEN BALL BEARING DRAWER SLIDERS (PR)Read moreCabinet & Chest Spares
To suit Kennedy, Senator and Yamoto cabinets and chests.
-
16″ NEWCASTLE DRAINERRead moreRutland Cable Laying, Draining & Grafting Tools
High-tensile tubular steel construction designed for heavy industrial and professional use. Shovel head is finished in a tough epoxy powder coating which prevents rusting and reduces soil adhesion.
Grafting Spade – GSC140
All steel with a slightly dished head. Ideal for digging post holes in confined spaces.
Type: all metal.
Handle type: straight metal.
Shaft: metal.
Blade material: carbon steel, epoxy coated.
Blade width: 140 – 127mm.
Blade height: 280mm.
Overall length: 1650mm.Cable Laying Shovel – CLC140
All steel with slightly dished blade and round cutting edges. Designed for clay digging and heavy ground breaking work.
Type: all metal.
Handle type: MYD metal framed.
Shaft: metal.
Blade material: carbon steel, epoxy coated.
Blade width: 140 – 115mm.
Blade height: 280mm.
Overall length: 990mm.Newcastle Drainer – NCD165
Ideal for digging trenches, pipe, cable and drain channels and post holes.
Type: all metal.
Handle type: MYD metal framed.
Shaft: metal.
Blade material: carbon steel, epoxy coated.
Blade width: 165 – 100mm.
Blade height: 400mm.
Overall length: 1115mm. -
16″ SWEDISH PATTERN PIPE WRENCH ‘S’ JAWSRead moreKennedy Swedish Pattern Pipe Wrenches – 90° Type
âSâ Type
âSâ shaped jaws grip at three points to ensure a maximum grip.
Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle.
Conform to DIN 5234. -
16″ SWEDISH PATTERN PIPEWRENCH 90 DEG JAWSRead moreKennedy Swedish Pattern Pipe Wrenches – 90° Type
90° Type
Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle.
Conform to DIN 5234. -
16″ WEIGHTY TEE HINGE (PR) SELF COLOUREDRead moreTee Hinges (Supplied as pairs)
Extra heavy duty: for very high load applications such as for farm field gates.
Material thickness up to 4mm. -
16″x1.1/2″x 4TPI HSS ALL HARD HACKSAW BLADESRp332.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
16″x1.1/2″x 6TPI HSS ALL HARD HACKSAW BLADESRp334.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
16″x1.1/4″x 6TPI HSS ALL HARD HACKSAW BLADESRp269.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
16″x1.1/4″x10TPI HSS ALL HARD HACKSAW BLADESRp269.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
16″x1.1/4″x14TPI HSS ALL HARD HACKSAW BLADESRp269.000Read moreHSS All Hard Power Saw Blades
Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.
Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2â).
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4â to 3/4â).
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16â to 1).
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2â to 1 1/2â).
TPI: 4. Suitable for Section Width: 19mm and above (3/4â and above). -
16″x250Gx330M LAYFLAT TUBINGRead moreAvon? Layflat Polythene Tubing
Customise your polythene bag size! Choose your preferred width and use the layflat tubing to make your own custom sized bags or sleeves. Tubing can be heat sealed, tied or stapled closed. Available in Clear and Black. Larger sizes available on request.
-
16/20mm C-SPANNERRead moreSpanners & Locknuts
Suitable for all collet chucks including straight shank.
-
160 K20 BRAZED TOOLRp215.000Read moreKennedy Cranked Turning Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.