Archives: Products

Showing 4161–4176 of 23773 results

13mm HSS SC/SH B/N SLOT DRILL

Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
13mm HSS SC/SH END MILL

Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

Read more
13mm HSS SC/SH SLOT DRILL

Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
13mm HSS-COBALT SC/SH END MILL

Sherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric

Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30Â° helix.
Manufactured to BS 122 : Part 4 : 1980.

Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

Read more
13mm HSS-COBALT SC/SH SLOT DRILL

Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

Short Series – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
13mm IMPACT SOCKET 1/2″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Standard Length, 6-Point

1/2″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
13mm IMPACT SOCKET 1/4″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1/4″ Drive Metric, Standard Length, 6-Point

1/4â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
13mm IMPACT SOCKET 3/8″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point

3/8â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
13mm INSULATED HEXAGON SOCKET 1/2″ SQ/DR

Insulated Sockets & Accessories

All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets.

Read more
13mm INSULATED OPEN JAW WRENCH

Insulated Spanners

Single End Open Jaw
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.

Read more
13mm INSULATED RING SPANNER

Insulated Spanners

Insulated Single End Ring Spanners
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.

Read more
13mm LONG MULTI-TOOTH CUTTER

M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Sizes available: 2 – 52mm diameter short and 13 – 52mm diameter long series.

Long Series
Shank diameter: 19mm/3/4â.
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Read more
13mm O/E CROWFOOT WRENCH3/8″ SQ. DRIVE

Kennedy Crowfoot Wrenches, 3/8″

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc. For use with 3/8â square drive tools.

Read more
13mm OFFSET CV COMBINATION SPANNER

Kennedy Industrial Offset Combination Spanners – Metric

Metric
Chrome vanadium steel. 15Â° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B.

Read more
13mm PROFESSIONAL COMBINATION WRENCH

Kennedy Professional Combination Spanners – Metric

Metric
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6.

Read more
13mm RATCHET COMBINATIONWRENCH

Kennedy Professional Ratchet Combination Spanners – Metric

Metric
Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5Â° movement to operate ratchet. Thin wall design for greater
access. Conform to ASME B107.6.

Read more