Archives: Products
Showing 4113–4128 of 23773 results
-
130mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
130mm/5.1/4″ DIAGONAL CUTTING NIPPERSRead moreKennedy Standard Diagonal Cutting Nippers
Bonded vinyl-coated handle. Double polished head and joint. Induction hardened cutting edges. Designed to give added strength at the point yet still fit into confined spaces. The cutting edge is offset at a slight angle to the handles to allow close cuts to a flat surface.
-
130mm/5.1/4″ DIAGONAL NIPPERSRead moreYamoto Diagonal Cutting Nippers
Industrial quality chrome vanadium steel, chemically blacked. Designed to give added strength at the point and allow hard wire to be cut without damaging the edge thus giving prolonged life. Bi-material grips.
-
130mm/5.1/4″ ELECTRONICS SHEARRead moreKennedy Electronics Shear
Ground carbon steel blades. Cushion spring-loaded plastic grips. Steel plate spring. Non-bevelled cutting edges for flush cutting. Burnished head. Cuts copper wire up to 14AWG.
-
130mm/5.1/4″ ESD FLAT NOSE PLIERSRead morePro-Torq Miniature ESD Pliers & Cutters
Dissipative handles safely discharge any electrostatic energy, reducing possibility of damage to sensitive items. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.
-
130mm/5.1/4″ ESD LONG NOSE PLIERSRead morePro-Torq Miniature ESD Pliers & Cutters
Dissipative handles safely discharge any electrostatic energy, reducing possibility of damage to sensitive items. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.
-
130mm/5.1/4″ MICRO FLAT NOSE PLIERSRead moreKennedy Miniature Pliers
Made from high quality chrome nickel steel with induction ground cutting edges. Double dipped PVC grips for user comfort and control. Used for delicate, fine and accurate work in a continuous production environment. Spring loaded return for quick repetitive opening and operator comfort.
Spring Loaded Return – For quick, repetitive work and operator comfort. -
130mm/5.1/4″ MICRO PROF FLAT NOSE PLIERSRead moreKennedy Pro-Torq Miniature Pliers
The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Made from high quality chrome nickel steel with induction ground cutting edges. Used for delicate, fine and accurate work in a continuous production environment.
Spring-Loaded Return – For quick, repetitive work and operator comfort. -
130mm/5.1/4″ MICRO PROF LONG NOSE PLIERSRead moreKennedy Pro-Torq Miniature Pliers
The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Made from high quality chrome nickel steel with induction ground cutting edges. Used for delicate, fine and accurate work in a continuous production environment.
Spring-Loaded Return – For quick, repetitive work and operator comfort. -
130×8.80mm (11/32″) PARALLEL PIN PUNCHRead moreKennedy Parallel Pin Punches
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
-
132 P20/P30 BRAZED TOOLRead moreKennedy Bar & Knee Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
132mm CURVED PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Curved Dolly
Curved Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For raising low spots on panels. The edge can also be used to restore the shape of a roof and reform beads. -
-
133mm DIA. (5.1/4″) BI-METAL HOLESAWRp614.000Read moreConstant Pitch Bi-Metal HSS Holesaws
Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.
-
133mm DIA. (5.1/4″) BI-METAL V/P HOLESAWRp614.000Read moreVariable Pitch Bi-Metal HSS Holesaws
For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth. -
135mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
