Archives: Products
Showing 3905–3920 of 23773 results
-
12×1.75mmx1.1/2″ O/D HSSDIERp286.000Read moreMetric Coarse HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external
screw threads. -
12×1.75mmx1.5/16″ O/D HSS DIERp205.000Read moreMetric Coarse HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external
screw threads. -
12×1.75mmx2″ O/D HSS DIERp673.000Read moreMetric Coarse HSS Ground Thread Dies
BS 1127
For use in diestocks to produce external
screw threads. -
12×1″ SILVER-TT POZI CSK WOODSCREW BZP (100)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
12×1/8x20mm A30RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
12×1/8x20mm C24RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
12×1/8×7/8″ A30RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
12×1/8×7/8″ C24RBF FLAT CUTTING DISCRead moreFlat Reinforced Cutting Discs
Grade A30 – For general-purpose use on metals.
Grade C24 – For use on stone and non-ferrous materials.
Grade R30 – For use on stainless steel.
Grade X24 – Special, for use on cast iron.Type 41 Flat Reinforced Cutting
Manufactured to assureoperator safety and optimum performance. For use withall portable angle grinders. 180mm to 230mm discs can also be used on circular saws and 300 to 350mm discs are foruse with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting. -
12x100mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
12x100mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
12x125mm MALL. FENCING BARREL STRAINER BZP-E/GALVRead moreForged Straining Screws – Hook to Eye
Used to adjust the tension in line wire or wire rope. Galvanised steel.
-
12x12cm MEDIUM STERILE DRESSING (PK-6)Read moreUnmedicated Dressings
High quality absorbent dressings. Medium and large dressings are sterile. Eye pad and triangular bandage are non-sterile.
-
12x12mm BALL SHAPE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
12x13mm DROP FORGED OPENEND SPANNERRead moreSenator Open Ended Spanners – Metric
Metric
Drop forged steel with 15° cranked open ends. Conform to ASME B107.39. -
12x13mm RING CRESCENT WRENCHRead moreKennedy Ring Crescent Wrenches
Chrome vanadium steel with satin chrome finish. Heads conform to DIN 838.
-
12x150mm FLAT COLD CHISELRead moreKennedy Cold Chisels – Chrome Vanadium: Flat
Flat
Used for cutting and chipping cold metals and brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.