Archives: Products
Showing 3857–3872 of 23773 results
-
12oz CROSS PEIN HAMMER WOOD SHAFTRead moreCross Pein Hammers
Cross pein hammers are traditionally used by joiners and fitters. Cross pein can be used for setting pins and nails prior to âdriving homeâ with the flat faced pein.
Warrington Hardwood Shaft
Close grained hardwood shaft shaped to comfortably fit in the hand. Forged steel head with ground and polished striking face. -
12oz WELDERS CHIPPING HAMMER WOOD SHAFTRead moreWelders Chipping Hammers
Scaling and chipping hammers. For boiler scaling, weld dressing etc.
Hardwood Shaft
Manufactured from tempered and hardened steel, chisel and point striking faces with close grain hardwood handle. -
12V 0.25A SPOT CLEAR BULBRead moreBulbs
To suit Edison pocket mini torches and security flashlights
-
12×0.5mm ST/SH 4FL C/RADIUS END MILL Q-COATRead moreCarbide Plain Shank Corner Radius End Mills 4 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6
ECQ-4PR Carbide Q-Coat.Series 86 Regular Length
-
12×0.5mmx965M MILL WOUNDSTRAPPINGRead moreAvon? Steel Hand Banding Mill Wound
Each layer oscillates across the layer below, uniformly and tightly across the 63.5mm width of the coil. 0.5mm thickness.
Approximate breaking strain:
12mm: 561kg,
16mm: 714kg,
19mm: 846kg.
Approximate reel length:
12mm: 930m,
16mm: 744m,
19mm: 605m. -
12×1.00mm HSS GT STR. FLUTE PLUG TAPRp274.000Read moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Plug
IS0 529 – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
12×1.00mm HSS GT STR. FLUTE SECOND TAPRp274.000Read moreSherwood Metric Fine HSS Ground Thread Taps, Straight Flute – Second
IS0 529 – Straight Flute Individual Sizes – Second
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
-
12×1.00mm HSS GT STR. FLUTE TAP SETRp824.000Add to cartSets of Three
1 each, taper, second and plug lead.
-
12×1.00mm HSS GT STR. FLUTE TAPER TAPRp274.000Read more
Metric Fine
HSS Ground Thread TapsIS0 529
Straight Flute Individual Sizes(1) Diameter and pitch not
mentioned in ISO. -
12×1.00mm HSS HEXAGON DIE NUTRp380.000Read moreMetric Fine HSS Ground Thread Die Nuts
BS 1127
For use with spanners to clean and repair
existing external screw threads. -
12×1.00mmx1.5/16″ O/D HSS DIERp258.000Read moreMetric Fine HSS Ground
Thread DiesBS 1127
For use in diestocks to produce external screw threads. -
12×1.0mm ST/SH 2FL C/RADIUS SLOT DRILL Q-COATRead moreSwissTech Carbide Plain Shank Corner Radius Slot Drills 2 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6.
SCQ-2PR Carbide Q-Coat.Series 85 Regular Series
Dimensions to DIN 844. -
12×1.0mm ST/SH 4FL C/RADIUS END MILL Q-COATRead more
Carbide Plain Shank Corner Radius End Mills 4 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6
ECQ-4PR Carbide Q-Coat.Series 86 Regular Length
-
12×1.1/2″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
12×1.1/4″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read more
Matlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
12×1.25mm HSS GT SPIRAL FLUTE TAPRp839.000Read moreSpiral Flute
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
For all technical and dimensional specifications please refer to our catalogue.