Archives: Products
Showing 3777–3792 of 23773 results
-
12mm HSS-COBALT PM WELDON F/P RIPPER P/POWERRead moreSwissTech HSS-E PM Coated Fine Pitch Ripper: Series 94, Regular – Peak Power Coated
Series 94 – Regular
Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6. Dimensions to DIN 844.The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.
Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.
These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.
-
12mm HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Metric
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000. -
12mm HSS-COBALT SC/SH F/P RIPPERRead moreSherwood HSS-EV Threaded Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel. Knuckle form, h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
12mm HSS-COBALT SC/SH KNUCKLE RIPPERRead moreSherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Standard Series – Metric
Standard Series K412T
Knuckle Form
For use when heavy metal removal and good surface finish are required. Uncoated. Bright finish. Flute type: 25° spiral, roughing truncated. Shank diameter to js14.Metric Tolerances
Diameter ± 0.127mm -
12mm HSS-COBALT SC/SH SLOT DRILLRead moreSherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric
Short Series – Metric
Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
12mm HSS-COBALT WELDON 45DEG H/HELIX END MILLRead moreSwissTech Weldon Shank HSS-E PM TiALN Coated 45° High Helix Milling Cutters: Series 90 – Regular
Series 90 – Regular Series
Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.
-
12mm HSS-COBALT WELDON C/P RIPPERRp353.000Read moreSherwood HSS-E Weldon Shank Coarse Pitch Ripper Cutters
Regular Series
Industrial quality for shaping and forming metal components. 4 flute ripper cutters.
Manufactured from sintered HSS-E extra vanadium steel. Knuckle form, h8 tolerance, standard length. Shank to DIN 1835D. -
12mm HSS-COBALT WELDON F/P RIPPERRp353.000Read moreSherwood HSS-EV Weldon Shank Fine Pitch Ripper Cutters
Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel.
Knuckle form. h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D. -
12mm IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Standard Length, 6-Point
1/2″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
12mm IMPACT SOCKET 1/4″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/4″ Drive Metric, Standard Length, 6-Point
1/4â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
12mm IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point
3/8â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
12mm INSULATED HEXAGON SOCKET 1/2″ SQ/DRRead moreInsulated Sockets & Accessories
All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets. -
12mm INSULATED OPEN JAW WRENCHRead moreInsulated Spanners
Single End Open Jaw
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V. -
12mm INSULATED RING SPANNERRead moreInsulated Spanners
Insulated Single End Ring Spanners
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V. -
12mm LAPOVER SEALS (BOX-4000)Read moreAvon? Seals
Snap On: Placed over the overlapping strap ends.
Lap Over: Must be threaded onto strap before tensioning. -
12mm LONG TAPER PUNCHRead moreKennedy Taper Punches
Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.