Archives: Products
Showing 3729–3744 of 23773 results
-
12mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
12mm CHROME VANADIUM COMBINATION SPANNERRead moreYamoto Industrial Combination Spanners
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.6.
-
12mm CROSSBAR ASSEMBLYAdd to cartKennedy Magnetic Stand Fitments – Crossbar Assembly
All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.
Crossbar Assembly
With lug adaptor. 1/4â I/D lug -
12mm DEE SHACKLE BZP-ELECTRO GALV (PK-2)Read moreDee Shackles
A coupling link for chain and rope with a ?D? shape to prevent excess movement. Material and pin diameters are equal except where stated. Rated loads are for guidance only – ?tested? dee shackles are available to order.
-
12mm DEEP IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Deep Length, 6-Point
1/2â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
12mm DEEP IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point
3/8â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
12mm DEEP SOCKET 1/2″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
12mm DEEP SOCKET 1/4″ SQDRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Metric
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
12mm DEEP SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
12mm DEEP SOCKET 3/8″ SQDRRead moreKennedy Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
one-twelfth turn to engage the next point of the socket. -
12mm DIA BRASS WIRE BOTTLE BRUSH MS TWISTED WIRERead moreTwisted Wire Tube Brush
For industrial maintenance, agricultrial, workshop, machinery etc. For decarbonising and heavy duty cleaning use of tubes, struts, awkward places etc.
-
12mm DIA. x 100mm COBALT TOOLBITRp481.000Read moreHSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
12mm DIA. x 125mm COBALT TOOLBITRead more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
12mm DIA. x 160mm COBALT TOOLBITRp806.000Read more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
12mm DIA. x 63mm COBALT TOOLBITRead more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
12mm DIA. x 80mm COBALT TOOLBITRead more
HSS Cobalt Toolbits
5% Cobalt Round Metric
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom).