Archives: Products
Showing 2769–2784 of 23773 results
-
10x20mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
10x20mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
10x20mm POINTED TREE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Pointed Tree
Pointed Tree
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10x20mm ROUND TREE CARBIDE BURR CUT 3Read moreKennedy Carbide Burrs – Flame Shape
Round Tree
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10x20mm ROUND TREE CARBIDE BURR CUT 9Add to cartKennedy Carbide Burrs – Flame Shape
Round Tree
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10x20mm SPINDLE MOUNTED HOLDERRead moreYork Drum Holders
Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.
-
10x24mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
10x24mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
10×25 COMPACT BINOCULARSRead moreRutland Compact Style Binoculars
Compact folding design for easy storage and transport. The high quality roof prisms and UV protective coated ocular lenses are housed in a polyurethane body coated in a shock absorbing high grip rubber armour. Diopter adjustment for improved image clarity and sharpness. To allow use with spectacles the soft rubber eye cups fold down. Accurate focusing of the binoculars is controlled by fingertip movement of the central focusing wheel. Integral neck strap eyelets and tripod mounting threaded recess point. Supplied complete with neck strap and cleaning cloth. Suitable for camping/hiking, outdoor spectator sports, nature viewing, theatre. Lead- and arsenic-free glass.
-
10×25 MAG BINOCULARS REDLENSESRead moreRutland Compact Style Binoculars
Compact folding design for easy storage and transport. The high quality roof prisms and UV protective coated ocular lenses are housed in a polyurethane body coated in a shock absorbing high grip rubber armour. Diopter adjustment for improved image clarity and sharpness. To allow use with spectacles the soft rubber eye cups fold down. Accurate focusing of the binoculars is controlled by fingertip movement of the central focusing wheel. Integral neck strap eyelets and tripod mounting threaded recess point. Supplied complete with neck strap and cleaning cloth. Suitable for camping/hiking, outdoor spectator sports, nature viewing, theatre. Lead- and arsenic-free glass.
-
10x250mm CABINET HANDLE SCREWDRIVERRead moreKennedy Cabinet Screwdrivers – Flared Tip, Round Blade
Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
Flared Tip, Round Blade
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
10x250mm ENGINEERS SCREWDRIVERRead moreKennedy Engineersâ & Electriciansâ Screwdrivers: Flared Tip, Round Blade
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Flared Tip, Round Blade
Same as the parallel tip.
(Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.) -
10x250mm FLAT HI-GRIP SCREWDRIVERRead moreKennedy âHi-Gripâ Screwdrivers – Flared Tip, Round Blade
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
*Flat blades have hexagon bolster to allow higher torque to be applied via a spanner.Flared Tip, Round Blade
Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
10x250mm FLAT PRO-TORQ SCREWDRIVERRead moreKennedy Pro-Torq Screwdrivers – Flared Tip, Round Blade
Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied. With convenient hanging hole in the handle for storage.
Flared Tip, Round Blade
To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head. -
10x250mm SQ BLADE ENGINEERS SCREWDRIVERRead moreKennedy Engineersâ & Electriciansâ Screwdrivers: Flared Tip, Square Blade
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Flared Tip, Square Blade
Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver. -
10x250mm SQUARE BLADE PRO-TORQ SCREWDRIVERRead moreKennedy Pro-Torq Screwdrivers – Flared Tip, Square Blade
Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied. With convenient hanging hole in the handle for storage.
Flared Tip, Square Blade
Square bladed screwdrivers can be gripped in a spanner or locking wrench to allow greater torque to be applied from the side rather than from directly above the screwdriver.