Archives: Products
Showing 2737–2752 of 23773 results
-
10x100mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
10x10mm AL/OX SANDING BANDS GRIT 150Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
10x10mm AL/OX SANDING BANDS GRIT 60Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
10x10mm AL/OX SANDING BANDS GRIT 80Read moreYork Sanding Bands
Spiral wound with tear-resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals.
* P60 = Coarse, P80 = Medium, P150 = Fine. -
10x10mm BALL SHAPE CARBIDE BURR CUT 3Read moreKennedy Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10x10mm BALL SHAPE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10x10mm SPINDLE MOUNTED HOLDERRead moreYork Drum Holders
Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.
-
10x10x 20mm GREEN SILICON CARBIDE SHARPENING STONERead moreSharpening Stone
Green Silicon Carbide: for use on non-ferrous metals and alloys
-
10x11mm DROP FORGED OPENEND SPANNERRead moreSenator Open Ended Spanners – Metric
Metric
Drop forged steel with 15° cranked open ends. Conform to ASME B107.39. -
10x11mm RING CRESCENT WRENCHRead moreKennedy Ring Crescent Wrenches
Chrome vanadium steel with satin chrome finish. Heads conform to DIN 838.
-
10×12.5mm P120 ALUMOXIDESANDER BANDS (PK10)Read moreKobe Multi Tool Accessories – Sanding Bands
Suitable for use with Kobe, Dremel and Osaki Multi Tools.
Sanding Bands
Al-ox abrasive for shaping and smoothing wood and fibreglass and removing rust.
Quick change, use with holders shown below. Supplied in packs of 10. -
10×12.5mm P60 ALUMOXIDE SANDER BANDS (PK10)Read moreKobe Multi Tool Accessories – Sanding Bands
Suitable for use with Kobe, Dremel and Osaki Multi Tools.
Sanding Bands
Al-ox abrasive for shaping and smoothing wood and fibreglass and removing rust.
Quick change, use with holders shown below. Supplied in packs of 10. -
-
10x125mm MALL. FENCING BARREL STRAINER BZP-E/GALVRead moreForged Straining Screws – Hook to Eye
Used to adjust the tension in line wire or wire rope. Galvanised steel.
-
10x15mm OVAL SHAPE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Oval Shape
Oval Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
10×2.0mm ST/SH 4FL C/RADIUS END MILL Q-COATRead moreCarbide Plain Shank Corner Radius End Mills 4 Flute
Centre cutting.
To Manufacturers Standards.
Cutting diameter to e8.
Shank diameter to h6
ECQ-4PR Carbide Q-Coat.Series 86 Regular Length
