Archives: Products

Showing 2593–2608 of 23773 results

10mm HSS-COBALT SC/SH SLOT DRILL

Sherwood HSS-Co 5% Threaded Shank Slot Drills 2 Flute – Metric

Short Series – Metric
Bright finish. Flute type: 30Â° helix. Manufactured to BS 122: Part 4: 1980.

Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

Read more
10mm HSS-COBALT WELDON 45DEG H/HELIX END MILL

SwissTech Weldon Shank HSS-E PM TiALN Coated 45Â° High Helix Milling Cutters: Series 90 – Regular

Series 90 – Regular Series
Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

Read more
10mm HSS-COBALT WELDON C/P RIPPER
Rp318.000

Sherwood HSS-E Weldon Shank Coarse Pitch Ripper Cutters

Regular Series
Industrial quality for shaping and forming metal components. 4 flute ripper cutters.
Manufactured from sintered HSS-E extra vanadium steel. Knuckle form, h8 tolerance, standard length. Shank to DIN 1835D.

Read more
10mm HSS-COBALT WELDON F/P RIPPER
Rp318.000

Sherwood HSS-EV Weldon Shank Fine Pitch Ripper Cutters

Regular Series
4 flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel.
Knuckle form. h8 tolerance. Standard length. Dimensions to DIN 844. Shank to DIN 1835D.

Read more
10mm IMPACT SOCKET 1/2″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Metric, Standard Length, 6-Point

1/2″ Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
10mm IMPACT SOCKET 1/4″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1/4″ Drive Metric, Standard Length, 6-Point

1/4â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
10mm IMPACT SOCKET 3/8″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Metric, Standard Length, 6-Point

3/8â Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
10mm INSULATED HEXAGON SOCKET 1/2″ SQ/DR

Insulated Sockets & Accessories

All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets.

Read more
10mm INSULATED OPEN JAW WRENCH

Insulated Spanners

Single End Open Jaw
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.

Read more
10mm INSULATED RING SPANNER

Insulated Spanners

Insulated Single End Ring Spanners
Chrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.

Read more
10mm LONG TAPER PUNCH

Kennedy Taper Punches

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.

Read more
10mm MAG FINE ADJUSTING HEAVY DUTY FITMENT

Kennedy Magnetic Stand Fitments – Heavy Duty Fitment, Fine Adjusting

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment – Fine Adjusting
Fitted as standard to KEN- 333-2060K and KEN- 333-2050K.
Column: 12 x 175mm.
Cross bar: 10 x 150mm with fine adjustment.
Threaded: M8 x 1.25mm.

Read more
10mm MAG PLAIN HEAVY DUTY FITMENT

Kennedy Magnetic Stand Fitments – Heavy Duty Fitment, Plain

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment – Plain
Fitted as standard to KEN-333-2100K and KEN-333-2030K.
Column: 12 x 175mm.
Cross bar: 10 x 165mm.
Threaded: M8 x 1.25mm.

Read more
10mm NUT SPINNER

Kennedy Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles. 6ââ(150mm) combined socket and blade length. Overall length: 230mm.

Read more
10mm O/E CROWFOOT WRENCH3/8″ SQ. DRIVE

Kennedy Crowfoot Wrenches, 3/8″

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc. For use with 3/8â square drive tools.

Read more
10mm OFFSET CV COMBINATION SPANNER

Kennedy Industrial Offset Combination Spanners – Metric

Metric
Chrome vanadium steel. 15Â° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B.

Read more