Archives: Products
Showing 2561–2576 of 23773 results
-
10mm HEX BIT ADAPTOR 3/8″ SQ. DRIVERead moreYamoto Screwdriver Bit Sockets, 3/8″
Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining grooves. Conform to DIN standards.
-
10mm HEX DRIVER IMPACT SOCKET 1/2″ SQ. DR.Read moreKennedy Chrome Molybdenum Impact Sockets & Accessories: 1/4″ Drive Reducers & Adaptors
Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 and 19mm.
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
10mm HEX DRIVER IMPACT SOCKET 3/8″ SQ. DR.Read moreKennedy Chrome Molybdenum Hex Driver Impact Sockets 3/8″ Sq. Dr.
Hexagon sizes: 4, 5, 6, 7, 8, 10 and 12mm.
Conforms to DIN 3129.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
10mm HEX SOCKET BIT 3/8″SQ DRRead moreKennedy Screwdriver Bit Sockets, 3/8″
Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free to ensure non sparking. All have ball retaining grooves. Conform to DIN standards.
-
10mm HSS 3FL STR/SHK SP/FL COUNTERBORERp656.000Read moreHSS Solid Counterbores – Plain Shank
Plain Shank
Spiral flute, 3 flute. Medium duty. Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Manufactured to BS328: 5:1983. -
10mm HSS L/S SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nosed Slot Drills 2 Flute – Metric
Long Series Type B230T
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30 helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
10mm HSS L/S SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills 4, 6 & 8 Flute – Metric
Long Series E430T
Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00. Tolerance: +0.1250, -0.0000. -
10mm HSS L/S SC/SH SLOT DRILLRead moreSherwood HSS Threaded Shank 2 Flute End Mills (Slot Drills) – Metric
Long Series 5230T
Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089*Based on BS122: Part 4: 1980 though specific diameter is not included.
-
10mm HSS PLAIN SHANK CORNER ROUNDING CUTTERRead moreSherwood HSS Plain Shank Corner Rounding Cutters
Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2. Manufactured to works standards. 5° RH Flutes. Bright finish, straight helix. Radii tolerance: ± 0.005â.
-
10mm HSS PLAIN SHANK T-SLOT CUTTERRp1.541.000Read moreSherwood HSS Plain Shank T-Slot Cutters
Used for machining T-slots on slide tables, fixtures etc. to DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2â have 6 flutes and 18mm and 5/8â upwards have 8 flutes. Made to DIN 851. Flute form 12° RH/LH
Metric Limits of Tolerance
Diameter: +0.13 – 0.13
Length: +0.13 – 0.13 -
10mm HSS SC/SH B/N SLOT DRILLRead moreSherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric
Short Series Type B210T
Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
10mm HSS SC/SH CORNER ROUNDING CUTTERRp1.861.000Read moreSherwood HSS Threaded Shank Corner Rounding Cutters – Metric
Designed to produce convex corner radii. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to works standards. 5° RH Flutes.
Bright finish, straight helix. Radii tolerance: ± 0.005â. Shank to DIN 1835/D. -
10mm HSS SC/SH END MILLRead moreSherwood HSS Threaded Shank End Mills Multi Flute – Metric
Short Series E410T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances
Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000. -
10mm HSS SC/SH SLOT DRILLRead moreSherwood HSS Threaded Shank Slot Drills 2 Flute – Metric
Short Series S210T – Metric
Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances
Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089 -
10mm HSS SC/SH T-SLOT CUTTERRp667.000Read moreSherwood T-Slot Cutters Threaded Shank HSS – Metric
Used for machining T-slots on slide tables, fixtures etc., to DIN 650. For milling structural, carburized and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2″ have 6 flutes and 18mm and 5/8″ upwards have 8 flutes. Made to DIN 851. Shank to DIN 1835/D. Flute form 12° RH/LH.
Metric Limits of Tolerance
Diameter: +0.13 – 0.13
Length: +0.13 – 0.13 -
10mm HSS-COBALT 2FL ST/SH SLOT DRILL 72mm O/ARp333.000Read moreSherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length
Regular Length
Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.