Archives: Products
Showing 2417–2432 of 23773 results
-
100x16mm F/GLASS ZIRC FLAP DISC P40Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS ZIRC FLAP DISC P60Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm F/GLASS ZIRC FLAP DISC P80Read moreHigh Performance Flap Discs
Zirconium Grade Glass Fibre-Backed (For stainless steel, non-scratch).
High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life. No backing pads needed. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA). Available in two grades and with two types of backing.
100mm Dia x 16mm Bore 15,300 MOS (rpm)
115mm Dia x 22mm Bore 13,300 MOS (rpm)
127mm Dia x 22mm Bore 12,000 MOS (rpm)
180mm Dia x 22mm Bore 8,600 MOS (rpm) -
100x16mm SIDE PLATE FOR WIRE WHEELRead moreKennedy Additional Side Plates for Circular Brushes
Additional Side Plates for Circular Brushes
Wire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives. -
100x1x16mm AS60 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
100×2.40mm (3/32″) PARALLEL PIN PUNCHRp55.000Add to cartKennedy Parallel Pin Punches
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
-
100×2.40mm (3/32″) SQUARE HEAD NAIL PUNCHRead moreKennedy Nail Punches
Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip.
Conform to BS 3066. (Hardness: heads 42 HRC. Max: points 52 – 58 HRC).
Overall length: 100mm (4â). -
100x20mm SIDE PLATE FOR WIRE WHEELRead moreKennedy Additional Side Plates for Circular Brushes
Additional Side Plates for Circular Brushes
Wire Wheels
Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives. -
100x20x30mm 30SWG WIRE BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Circular Brushes – Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Order side plates separately. (See below).
30 SWG -
100x22mm PLAIN 30SWG ARBOR CUP BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Cup Brushes
Multi purpose brush for removal of rust, paint and burrs. Ideally suited for use on bench machines and angle grinders.
30 SWG -
100x22mm PLAIN 50SWG ARBOR CUP BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Cup Brushes Twisted Knot – Threaded Bore
For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces.
50 SWG -
100x25mm (4×1″) OPEN TYPE EXTRA SOFT POLISHING MOPRead moreOpen Type Polishing Mops – Extra Soft
Extra Soft
For use on plastics but are also suitable for gold and silver. Soft material is unsuitable for steel, stainless and non-ferrous metals. Performs well with a medium pressure and our synthetic gloss polishing bars. -
100x25mm (4×1″) OPEN TYPE MEDIUM POLISHING MOPRead moreOpen Type Polishing Mops
Medium
For use with steel, brassware, nickel silver, copper, aluminium, chrome and plastics.
Made in 13mm (1/2â) sections, they will splay out when under pressure, ideal for work on uneven surfaces. Use with medium pressure and general-purpose polishing bar, fast cutting finishing bar and mirror finish polishing bar. -
100x25mm (4×1″) OPEN TYPE SOFT POLISHING MOPRead moreOpen Type Polishing Mops
Soft
Produces high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. Best used with medium polishing pressure. Can be used with our fast cutting and mirror finish polishing bars. -
100x25x11/5mm AL/OX FINE SLIP STONERead moreSlip Stones
Aluminium Oxide
For sharpening curved edge cutting tools.Oilstones
A comprehensive range of bench stones and sharpening stones to cover a wide variety of sharpening and honing applications. Most of the shapes and sizes are available in fine, medium and coarse grades. Available in aluminium oxide or silicon carbide, all stones can be used wet or dry to produce sharp cutting edges or to remove burrs.
Aluminium Oxide: Man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.
Silicon Carbide: Man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied. -
100x25x11/5mm AL/OX MEDIUM SLIP STONERead moreSlip Stones
Aluminium Oxide
For sharpening curved edge cutting tools.Oilstones
A comprehensive range of bench stones and sharpening stones to cover a wide variety of sharpening and honing applications. Most of the shapes and sizes are available in fine, medium and coarse grades. Available in aluminium oxide or silicon carbide, all stones can be used wet or dry to produce sharp cutting edges or to remove burrs.
Aluminium Oxide: Man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.
Silicon Carbide: Man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.