Archives: Products
Showing 16961–16976 of 23773 results
-
ENGINEERS APPRENTICES TOOLKIT 208-PCERead moreKennedy Apprentice Engineerâs Tool Kit- AET200 – 208 Piece
Supplied in a three drawer professional roller cabinet and a three drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.
3 Drawer Top Chest
Top compartment size: 89 x 661 x 150mm.
Drawer sizes: 1@ 51 x 591 x 282.5mm. 2@ 102 x 591 x 282.5mm.3 Drawer Roller Cabinet
Internal drawer dimensions
Bottom compartment size: 610 x 432 x 356mm.
Drawer sizes: 3@ 591 x 410 x 102mm.Contents:
⢠25 piece HSS drill set 1 – 13.00mm x 0.5mm.
⢠Six piece 200mm double cut engineerâs file set.
⢠Six piece 16cm cut 2 assorted needle file set.
⢠25 x 230 x 280mm assorted abrasive sheet.
⢠200mm chrome vanadium steel adjustable spanner.
⢠6 x 150mm flat cold chisel.
⢠19mm x 33m black pvc insulation tape.
⢠76mm, 18 blade combination feeler gauge set.
⢠4.8mm square head centre punch.
⢠150mm/6â stainless steel rule c/w pocket clip.
⢠178mm double ended engineerâs scriber.
⢠Eye loupe.
⢠Adjustable telescopic 30mm dia. inspection mirror (expands to 180mm).
⢠Six piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
⢠150mm/6â engineerâs square – BS 939 grade B.
⢠Tap wrenches 1.5 – 6.4mm and 6.4 – 19mm.
⢠Magnetic telescopic pick-up tool extends to 550mm.
⢠29 piece engineerâs bit set.
Allâ6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor.
Hexagon: 2, 3, 4, 5, 6, 7 and 8mm; flat 3, 4, 5, 5.5, 6.5 and 8mm; 3/32â, 1/8â, 5/32â, 3/16â, 1/4â, 7/32â and 5/16â; crosspoint No.1, 2 and 3; Pozidriv® No.1, 2 and 3.
⢠450g (1lb) ball pein hammer wood shaft.
⢠7.5m/25ft steel tape.
⢠Snap-off eight segment blade economy knife.
⢠Retractable trimming knife with five blades.
⢠Junior hacksaw frame.
⢠300mm lightweight professional hacksaw frame.
⢠Six off 12â x 1/2â x 18tpi HSS hacksaw blades.
⢠20 junior hacksaw blades.
⢠Two plastic handle household scissors.
⢠150mm snipe nose plier with side cutter.
⢠150mm diagonal cutting nipper.
⢠150mm engineerâs combination pliers with side cutter.
⢠250mm curved jaw high strength grip wrench.
⢠Eight piece Pro-Torq screwdriver set: crosspoint No.1 x 75, No.2 x 100; pozidriv®
No.2 x 100; flared 6.3 stubby, 6.3 x 100, 8.0 x 200; parallel 5.0 x 75, 5.0 x 150.
⢠14 piece combination spanner set: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
⢠25 piece metric socket set 1/2â square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14. Accessories: quick release ratchet handle,
sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
⢠Nine piece metric hex key set 1.5 – 10mm. -
ENGINEERS DATA REFERENCEBOOK NOV-08 V2Read moreThe ‘Engineers Reference Handbook’
A handy pocket sized reference booklet of data charts & tables
Suitable for the drawing office, toolroom or Workshop
9 Sections
194 Pages
Dimensions: (W x H)100 x 148mm -
ENGINEERS HI-GRIP SCREWDRIVER SET 12-PCERead moreKennedy âHi-Gripâ Screwdriver Sets
Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.
8-Piece Set Contents (mm):
Supplied in clear plastic wallet.
Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150.
Flared: 6.3 stubby, 6.3 x 100, 6.3 x 150, 9.3 x 250.12-PieceSet Contents (mm):
Supplied in clear plastic wallet.
Flared: 6.3 stubby, 6.3 x 100, 6.3 x 150, 8.3 x 200 and 9.3 x 250.
PZ: No.1 x 75, No.2 x 100, No.3 x 150.
Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100 No.3 x 150. -
ENGINEERS PRECISION STARTER KITRead moreOxford Apprentice Engineerâs Tool Set
Contents
150mm (6â) Engineerâs rule, 0 – 25 and 25 – 50mm micrometers, 25mm setting standard, 10x magnification eye loupe, 150 (6â) digital caliper, 0.5 – 1.0mm 20 blade feeler gauge, 51 metric 60° screw pitch gauge, pocket scriber. Technical data handbook. -
ENGINEERS SCREWDRIVER BIT SET 32-PCERead moreKennedy Engineersâ Screwdriver Bit Set – 32 Pieces
Crosspoint: No.1, No.2, No.3.
Pozidriv®: No.1, No.2, No.3.
Torx®: 15, 20.
Slotted: 3.5, 4.5, 5, 5.5, 6.5, 8mm.
Hexagon: 2, 3, 4, 5, 6, 8, 10mm, 3/32â,1/8â,5/32â,3/16â,1/4â,5/16â.
Square: 1, 2, 3.
1/4â hex x 60mm quick release magnetic bit holder.
1/4â square drive.
1/4â hex magnetic bit holder.
Supplied in a moulded case with a belt clip. -
ENGINEERS SCREWDRIVER SET 12-PCERead moreKennedy Engineersâ & Electriciansâ Screwdriver Set – 12 Pieces
With a traditional âflutedâ design handle. High quality steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.
Set Contents (mm):
Flared: 6.3 stubby, 6.3 x 100, 6.3 x 150, 9.5 x 250.
Parallel: 3.2 x 75, 3.2 x 150.
Crosspoint: No.0 x 75, No.1 stubby, No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150, No.4 x 200. -
ENGINEERS STARTER TOOLKIT (47-PCE)Read more47 Piece Engineer’s Workshop Tool Kit
⢠Six piece 16cm cut 2 assorted needle file set. ⢠10x 12 x 1/2″ x 18T all hard hacksaw blades.
⢠8″ (200mm) C/V adjustable spanner. ⢠6″ (150mm) stainless steel rule with pocket clip.
⢠Metric and inch feeler gauge, blade length: 60mm.
⢠1lb ball pein hammer with hickory shaft.
⢠16oz black rubber mallet with wooden shaft.
⢠5m/16ft locking tape rule with chrome casing.
⢠8 segment 18mm heavy duty snap-off blade knife.
⢠Retractable trimming knife.
⢠12″ DIY hacksaw.
⢠6″ heavy duty snipe nose pliers with side cutter.
⢠6″ diagonal cutting nippers.
⢠7″ linesman’s pliers.
⢠10″ multiple slip joint pliers.
⢠10″ straight blade tinsnips.
⢠10″ straight jaw high strength grip wrench.
⢠8 piece fluted handle screwdriver set.
⢠7 piece 6 – 19mm drop forged open-ended spanner set.
⢠21″ five tray cantilever toolbox. -
ENGINEERS WHITE WIPES 27x36cm (BOX-250)Read moreSolent Cleaning and Hygiene Handwipes & Cloths
The Solent range of hand wipes and cloths are suitable for almost every industrial or service orientated application. Manufactured from washed & sterilised natural fibres or from special formulated materials designed for high performance wipes, the removal of grease and grime or the mopping up of spillages becomes no more than an everyday cleaning task.
-
ENGINEERS WORKSHOP TOOLKIT (90-PCE)Read more90 Piece Engineer’s Workshop Tool Kit
Contents:
⢠Top chest.
⢠24 piece 1/2″ drive metric socket set.
⢠Six piece 16cm cut 2 assorted needle file set.
⢠10x 12″ x 1/2″x 18tpi all hard hacksaw blades.
⢠8″/200mm chrome vanadium adjustable spanner.
⢠12″ rule – walleted.
⢠Metric/inch feeler gauge 60mm blade length.
⢠11/2lb ball pein hammer- hickory shaft.
⢠16oz black rubber mallet – wood shaft.
⢠5m/16ft locking tape rule – chromed case.
⢠Eight segment 18mm heavy duty snap-off blade knife.
⢠Retractable trimming knife.
⢠DIY hacksaw.
⢠2x 50mm G-clamps.
⢠2x 100mm G-clamps.
⢠6″ snipe nose plier/side cutter.
⢠8″ straight blade tinsnip.
⢠6″ diagonal cutting nipper.
⢠7″ linesman’s pliers.
⢠10″ multiple slip joint pliers.
⢠10″ straight jaw high strength grip wrench.
⢠16 function 10-blade tool.
⢠15 piece duel grip screwdriver set.
⢠14 piece 6 – 19mm drop forged combination spanner set. -
ENGRAVER TIPS (PK-5)Read moreOsaki Replacement Tips
For use with Osaki ENG002. Supplied as a packet of 5.
-
EP2 HIGH LOAD LITHIUM GREASE 12.5KGRead moreSolent “Plus” Extreme Pressures Lithium Grease
High load lead-free lithium grease. Contains extreme pressure additives to allow use in heavy load conditions. Contains anti-rust additives to protect against corrosion. Anti-oxidants included to prolong product life High ageing stability/high oxidation stability.
Available in grade EP2.
Supplied in 400g, 5kg, 12.5kg or 50kg containers. -
EP2 HIGH LOAD LITHIUM GREASE 5KGRead moreSolent “Plus” Extreme Pressures Lithium Grease
High load lead-free lithium grease. Contains extreme pressure additives to allow use in heavy load conditions. Contains anti-rust additives to protect against corrosion. Anti-oxidants included to prolong product life High ageing stability/high oxidation stability.
Available in grade EP2.
Supplied in 400g, 5kg, 12.5kg or 50kg containers. -
EP2 HIGH LOAD LITHIUM GREASE CARTRIDGE 400gmRead moreSolent “Plus” Extreme Pressures Lithium Grease
High load lead-free lithium grease. Contains extreme pressure additives to allow use in heavy load conditions. Contains anti-rust additives to protect against corrosion. Anti-oxidants included to prolong product life High ageing stability/high oxidation stability.
Available in grade EP2.
Supplied in 400g, 5kg, 12.5kg or 50kg containers. -
ER16 9PCE COLLET SETRp2.836.000Read moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER20 2-13mm COLLET SETRead moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER25 15PCE COLLET SETRp4.598.000Read moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.