Archives: Products
Showing 16849–16864 of 23773 results
-
EA30 300x380x300 ELECTRONIC SAFERead moreMatlock⢠Electronic Safe
Matlock⢠electronic safes provide peace of mind when protecting your valuables. They are sturdily built from high-grade steel with a neutral colour paint finish. Matlock? electronic safes are the ultimate in convenience, each safe is equipped with a motorised electronic double bolt lock that can be programmed with a 3 to 8 digit code, an LED display clearly shows the operational status of the lock. Battery condition is also indicated, but should the battery fail before being replaced, an emergency key override is supplied.
-
EAR PLUG DISPENSER (1000PLUGS)Read moreTuffSafe Ear Plug Dispenser
The TuffSafe earplug dispenser is supplied with 1,000 TuffSafe cordless earplugs (Refill order code: TFF-958-9020K). The dispenser is designed for durability and ease of use in the workplace. Earplugs are dispensed singly simply by twisting the nozzle. The clear container allows the contents to be seen at all times helping to ensure, you do not unexpectedly run out of earplugs. The dispensers can either be fixed to a wall or stood on a workbench; anywhere you require them to be close at hand.
TuffSafe Ear plug specification:
Cordless type, disposable for comfortable hearing protection without impairing normal communication.
SNR: 37Db.
Product conforms to EN352-2: 2002.
Nominal size: smallest: 6, largest: 12.For the full range of TuffSafe PPE equipment and work wear please refer to our catalogue.
-
EAR PLUG DISPENSER REFILL BAG (1000 PLUGS)Read moreTuffSafe Ear Plug Dispenser
The TuffSafe earplug dispenser is supplied with 1,000 TuffSafe cordless earplugs (Refill order code: TFF-958-9020K). The dispenser is designed for durability and ease of use in the workplace. Earplugs are dispensed singly simply by twisting the nozzle. The clear container allows the contents to be seen at all times helping to ensure, you do not unexpectedly run out of earplugs. The dispensers can either be fixed to a wall or stood on a workbench; anywhere you require them to be close at hand.
TuffSafe Ear plug specification:
Cordless type, disposable for comfortable hearing protection without impairing normal communication.
SNR: 37Db.
Product conforms to EN352-2: 2002.
Nominal size: smallest: 6, largest: 12.For the full range of TuffSafe PPE equipment and work wear please refer to our catalogue.
-
EARTH RAMMER STEEL 4.5KG/10LB SQUARE HEADRead moreEarth Rammer
S51424
Square head supplied with tubular steel metal shaft. Used for compacting areas of tarmac or asphalt
or for tamping down backfill during the erection of fence posts.
Overall length: 1280mm.
Blade size: 130 x 130 x 25mm. -
EC2 ELECTRONIC TALLY COUNTER UP ONLYRead moreOxford Electronic Tally Counter – Up
Electronic tally counter counts up to 9999. Four-digit LCD with large push-buttons. High-impact construction with comfortable rubber keys. Optional audible counting indicator. Battery included.
Size (W x D x H): 30 x 15 x 60mm. -
EC3 ELECTRONIC TALLY COUNTER UP/DOWNRead moreOxford Electronic Tally Counter – Up/Down
Electronic tally counter counts up to 9999. Four-digit LCD with large push-buttons. Reverse function to count down as well as up. High-impact construction with comfortable rubber keys. Optional audible counting indicator. Battery included.
Size (W x D x H): 30 x 15 x 60mm. -
ECONOMY CAR WASH BRUSHRead moreEconomy Car Wash Brush
Soft synthetic bristles with plastic body to prevent damage to car bodywork. Fits 12mm (1/2″) diameter hose pipes.
-
ECONOMY HEAVY DUTY SNAP-OFF BLADE 8-SEG KNIFERead moreSenator UtilityâKnives: Snap-off Blade, 8 segment
Snap-off Blade
8 segment, 18mm heavy-duty.A range of knives with contoured moulded grips and steel slides that prevent blade slippage or case splitting and give the knife a smooth action. Snap-off blade knives have a blade locking mechanism in the thumb slide. Replacement blades available on request.
-
ECONOMY SNAP-OFF BLADE 8-SEG KNIFERead moreSenator UtilityâKnives: Snap-off Blade Knife, 8 segment
Snap-off Blade Knife
8 segment, 18mm economy.A range of knives with contoured moulded grips and steel slides that prevent blade slippage or case splitting and gives the knife a smooth action. Snap-off blade knives have a blade locking mechanism in the thumb slide. Replacement blades available on request.
-
ECONOMY STANDARD RETRACTABLE UTILITY KNIFERead moreSenator Standard Retractable Utility Knife
Diecast aluminium body with retractable blade, locking mechanism and lanyard hole. Complete with 1 spare blade.
-
ECONOMY STANDARD SNAP-OFFBLADE 13-SEG KNIFERead moreSenator UtilityâKnives: Snap-off Blade Knife, 13 segment
Snap-off Blade
13 segment, 9mm standard.A range of knives with contoured moulded grips and steel slides that prevent blade slippage or case splitting and gives the knife a smooth action. Snap-off blade knives have a blade locking mechanism in the thumb slide. Replacement blades available on request.
-
ED-0030432 BATTERY PACK 12VRead moreKobe Spare Battery & Charger
Spare Battery & Charger suitable for model ASB12VET-2.
-
ED-0030442 BATTERY PACK 14.4V NEW STYLERead moreKobe Spare Batteries & Charger
Spare batteries offer the advantage of continuous tool use while original batteries are charging, therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines and circuit board manufacturing.
Spare Battery to suit model ABH14.4VET-2.
Spare Charger to suit models ABH14.4VET-2, AID14.4 and AIW14.4V. -
ED-0040720 BATTERY CHARGER 12VRead moreKobe Spare Battery & Charger
Spare Battery & Charger suitable for model ASB12VET-2.
-
ED-0040730 BATTERY CHARGER 14.4VRead moreKobe Spare Batteries & Charger
Spare batteries offer the advantage of continuous tool use while original batteries are charging, therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines and circuit board manufacturing.
Spare Battery to suit model ABH14.4VET-2.
Spare Charger to suit models ABH14.4VET-2, AID14.4 and AIW14.4V. -
EDGE & CENTRE FINDER SET(5-PCE)Read moreKennedy Edge & Centre Finder – 5 Piece Set
Consists of a chuck body and four contact arms. Designed to check ârun-outâ or concentricity, straightness and alignment. Will indicate the position of a datum point on a component or fixture from the centre line of a machine spindle. Suitable for use on drill presses, lathes, milling machines, borers etc.
Chuck Body:
Held in the spindle using a suitable drill chuck or collet chuck (fig 1). The contact arms are retained in position using the knurled collar which lightly clamps the ball joint inside the body. Arms may be exchanged without the need to remove the body from the machine spindle.Universal Indicator Holder
The detachable end will allow clamping with 2 and 3 piece dovetail clamping assemblies and when removed will fit standard 1/4â side clamp. This uses the spindle centre line to align component bores or spigots, check the flatness or squareness of workpieces or fixturing and check run-out of components. The spindle should only be rotated manually to avoid damaging the dial test indicator (fig 1).Needle Point
To lightly mark out lines and positions on a component as a guide to subsequent operations, using the machineâs dials or digital read-out to position the scriber point (not illustrated).Position the contact arm in line, but slightly away from the surface to be aligned. When finding the surface of a diameter, the âDisc’ must be positioned as near to the centre of that diameter as possible. Run the spindle between 200 and 500 revs/min. The table or spindle is then moved slowly, to bring the contact arm closer to the surface to be aligned. The contact arm will tap lightly against the surface (fig 2) the movement of the arm will become less and less the nearer the datum point gets to the spindle centre line (fig 3). When the arm stops spinning in a straight line and starts to ‘jump’, this indicates the datum point (fig 4):
1/2 contact dia + Edge = Centre
1/2 contact dia – Centre = EdgeBall Contact .250â
Used to find a datum point .125â ± .0005â away from a flat surface.Disc Contact .100â
Used to find a datum point .050â ± .0005â away from a convex surface.Contents: Chuck Body, Universal Indicator Holder, Needle Point, Ball Contact, Disc Contact.