Relaunch Promotion
Product Showcase
Category: Chucks
Chucks
Showing 225–240 of 290 results
-
EN25 SCROLL SOFT JAWS 250mm (SET-3)Read moreScroll Jaws
To suit Toolmex and Bison chucks. 3 Jaw Sets.
-
EN32 SCROLL SOFT JAWS 315mm (SET-3)Read moreScroll Jaws
To suit Toolmex and Bison chucks. 3 Jaw Sets.
-
ER16 9PCE COLLET SETRp2.836.000Read moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER20 2-13mm COLLET SETRead moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER25 15PCE COLLET SETRp4.598.000Read moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER32 18PCE COLLET SETRp5.607.000Add to cartER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER40 23PCE COLLET SETAdd to cartER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
K2 CHUCK KEYRead moreKennedy Chuck Keys
Suitable for use with all industrial keyed chucks (including Rohm and Jacobs).
-
KG CHUCK KEYRead moreKobe Chuck Keys
Suitable for use with all industrial keyed chucks (including Rohm and Jacobs).
-
KK CHUCK KEYRead moreKobe Chuck Keys
Suitable for use with all industrial keyed chucks (including Rohm and Jacobs).
-
PARTING OFF TOOLHOLDER FOR T.0/T.1 TOOLPOSTRead moreIndexa Toolholders for Quick Change Toolposts – Parting Off Type
Parting Off Type
-
PARTING OFF TOOLHOLDER FOR T.2 TOOLPOSTRead moreIndexa Toolholders for Quick Change Toolposts – Parting Off Type
Parting Off Type
-
PT06 P/C 6″ LARGE SERRATED SOFT JAWS (SET-3)Read moreKennedy Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc.).
-
PT08 P/C 8″ LARGE SERRATED SOFT JAWS (SET-3)Read moreKennedy Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc.).
-
PT10 P/C 10″ LARGE SERRATED SOFT JAWS (SET-3)Read moreKennedy Serrated Soft Jaws
To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc.).
-
R8-BC 1/2″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â.
