Showing 17–31 of 31 results

• 

  JIGSAW BLADES (EQV. TO BOSCH T218A) PKT-5

  Jigsaw Blades

  HSS – Heavy Duty (Pack 5
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO BOSCH T227D) PKT-5

  Jigsaw Blades

  HSS – Heavy Duty (Pack 5
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO BOSCH T244D) PKT-5

  Jigsaw Blades

  HCS – Medium Duty (Pack 5)
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO BOSCH T301D) PKT-5

  Jigsaw Blades

  HCS – Medium Duty (Pack 5)
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO BOSCH T318A) PKT-5

  Jigsaw Blades

  HSS – Heavy Duty (Pack 5
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO BOSCH T318B) PKT-5

  Jigsaw Blades

  HSS – Heavy Duty (Pack 5
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES (EQV. TO MAKITA No.2) PKT-5

  Kennedy Jigsaw Blades

  Two Hole Type Suitable for old style Makita. HCS – Medium-Duty (Pack 5)

  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

  Read more
• 

  JIGSAW BLADES (EQV. TO MAKITA No.3) PKT-5

  Kennedy Jigsaw Blades

  Two Hole Type Suitable for old style Makita. HCS – Medium-Duty (Pack 5)

  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

  Read more
• 

  JIGSAW BLADES COMBI (PK-5)

  Jigsaw Blades

  Bi-Metal – High Performance (Pack 5)
  Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

  ‘T’ Type Shank
  ‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T101B) PKT-20

  ‘Contractor Packs’

  HCS – Medium-Duty (Pack 20)
  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T111C) PKT-20

  ‘Contractor Packs’

  HCS – Medium-Duty (Pack 20)
  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T118A) PKT-20

  “Contractor Packs”

  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.
  HSS – Heavy-Duty (Pack 20)

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T118B) PKT-20

  “Contractor Packs”

  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.
  HSS – Heavy-Duty (Pack 20)

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T127D) PKT-20

  “Contractor Packs”

  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.
  HSS – Heavy-Duty (Pack 20)

  Read more
• 

  JIGSAW BLADES CONTRACTORSSET (T144D) PKT-20

  ‘Contractor Packs’

  HCS – Medium-Duty (Pack 20)
  The most popular ‘T’ style blades bulk packed in 20’s for economy. Supplied in telescopic ‘pocket’ cases that are ideal for the industrial user.

  Read more