JIGSAW BLADES (EQV. TO BOSCH T318B) PKT-5

Jigsaw Blades

HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

Out of stock

SKU : KEN2403190K

Jigsaw Blades

HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.

‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.

Specification :
Brand : Kennedy Industrial
Capacity (mm) Alum. : 3.0-10.0
Capacity (mm) Plastics : –
Capacity (mm) Steel : 3.0-6.0
eCl@ss Code : 21011603
Effective Length : 100
Equiv. : T318B
Features : Wavy Set Teeth
Overall Weight : 0.056
Side set teeth : –
Supplier Part No. : D&N 3.11.20/5
Tapered and ground : –
Tooth Pitch : 2.0
UNSPSC Code : 27112802
Wavy set tooth form : y

Weight 1 kg
SKU: KEN2403190K Categories: , ,
0
    0
    Your Cart
    Your cart is emptyReturn to Shop