Relaunch Promotion
Product Showcase
Category: Collets
Collets
Showing 97–112 of 117 results
-
ER25 15PCE COLLET SETRp4.598.000Read moreER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER32 18PCE COLLET SETRp5.607.000Add to cartER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
ER40 23PCE COLLET SETAdd to cartER – Collet Sets
Manufactured from hardened and tempered high alloy steel.
All supplied in hard wearing bench cases. Conform to DIN 6499.
ER11: Number of collets: 10. Range 1.0 – 7.0mm.
ER16: Number of collets: 9. Range 1.0 – 10.0mm.
ER20: Number of collets: 11. Range 2.0 – 13.0mm.
ER25: Number of collets: 15. Range 1.0 – 16.0mm.
ER32: Number of collets: 18. Range 2.0 – 20.0mm.
ER40: Number of collets: 23. Range 3.0 – 26.0mm.Indexa ER collets are the most versatile toolholding system for any operation that utilises a round shank cutting tool in a machining centre. Typical applications include drilling, milling, tapping, reaming and boring.
When Indexa ER collets are used with round shank cutting tools the collet chucks centralise the cutting tool and if all the ER system components have been maintained correctly, this should result in increased tool life, higher feed rates, better work piece accuracy and enhanced work piece finish.
-
R8-BC 1/2″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 1/4″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 10mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 11mm COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 12mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 14mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 16mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 20mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 3/4″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 3/8″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 3mm COLLETRp1.010.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 5/8″ COLLETRead moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â. -
R8-BC 6mm COLLETRp805.000Read moreIndexa R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Dimensions: A = 24.1mm, B = 102.3mm, C = 31.5mm T = 7/16â UNF.
Angle: a = 8°25â.