Relaunch Promotion
Product Showcase
18-35mm DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
SKU : OXD3151400K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 200
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 18-35
UNSPSC Code : 41111600
Weight each : 0.58kg
| Weight | 1 kg |
|---|
Related products
-
‘SMILE DIAL’ PLUNGER TYPE DIAL GAUGE JEWELLEDRead moreKennedy Smile Dial Gauges Plunger Type
58mm (21/4â) Diameter Dial
Matt finish chromed housings and black oxidised limit hands. Jewelled. and 5/16â diameter stem. Fitted with 1/4â inside diameter centre back lug and 5/16â diameter stem. Manufactured to BS 907. -
DAM668 DIGITAL MULTIMETERAdd to cartDigital Multimeter – DAM668
DAM668
Removable rubber holster with integral lead holders. Features include continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication, low battery indicator, tilt stand/hanger.
Voltage max: 700V AC, 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety rating: Cat III 600V, Cat II 1000V.
Warranty: 1 year. -
REPLACEMENT PROBE FOR EDI5162700K/3000KRead moreReplacement Probe
Replacement Probe for Edison DM664 and DAM668 Digital Multimeters. (EDI-516-3000K) and (EDI-516-2700K).
-
AUTO RANGE HI-ACCURACY MULTIMETER – USB INTERFACERead moreEdison Auto Range Digital Multimeters – DAM100
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
DAM100
Auto Range Hi-Accuracy Digital Multimeter with USB interface, ideal for electrical troubleshooting and straightforward maintenance, initial start-up testing and R and D.
Linear frequency: 5Hz to 200KHz.
Logic frequency: 5Hz to 2MHz.
Duty cycle: 5% to 95%.
Diode testing: 0 to 2.5V.
AC/DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 50MW.
Capacitance: 5000mF.
Relative measurement function. Clear display with LED back light and data hold function auto power âOFFâ and low power indicator.
Digital display count: 50000.
Pack includes: digital multimeter, test probes, clamp-on trat leads, USB interface connection, CD rom âPC-LINKâ software (compatible with Windows 98ME, 2000, NT or XP), 6x 1.5V AAA batteries (installed), instruction manual, protective case with carry strap.
PC-LINK software features: measure graph, measure data record, simulate LCD display, analogue dial plate display, measure max/min display, sampling interva, graph export, measure data save.
Dimensions (W x D x H): 178 x 65 x 255mm.