Archives: Products
Showing 14433–14448 of 23773 results
-
8.00mm STEEL BALLS GRADEG100 (PACK 25)Read moreSteel Balls – Metric
Metric
Low carbon case hardened steel balls are for general use in castors, conveyors, non-precision bearings and any slow rotating parts. They have resistance to shock loads with a good load carrying ability and excellent resistance to surface wear. The G100 standard ball is of a high spherical standard. -
8.00mm TILE & MASONRY DRILL SET 2-PCERead moreTile & Masonry Drill Sets
2 Piece Sets
Two piece sets for drilling through glass, tiles, mirrors and ceramics.
Set contents: 1x masonry drill bit and 1x tile and glass drill bit. -
8.00mm TiN COATED JOBBER DRILLRp101.000Read moreSwissTech HSS TiN Coated Jobber Drills
Series 1001
General purpose drill, to drill steels with a tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. TiN coating provides longer tool life. Point angle: 118°, helix angle: normal, web thickness: normal, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to DIN 338 RN, DIN 338. -
8.00mm TiN TIPPED JOBBER DRILLRp71.000Read moreSwissTech HSS Straight Shank TiN Tipped Jobber Drills – Metric
Metric
Bright body with TiN coating on working part. For drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: normal, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 338. -
8.00mm VA HI-HELIX FOR STAINLESS DRILLRead moreSwissTech HSS-Co TiN Coated High Helix Drills, Straight Shank
Series 1060
Heavy duty drill for stainless steel, heat and acid-resistant steels, short chipping and high strength steels. High heat resistance allows drilling in titanium and titanium alloys. TiN coating provides longer tool life. Point angle: 130°. Helix angle: high. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters – 1 pce. Manufactured to DIN 338RN. -
8.00mm x 200mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
8.00mm x 250mm O/A HSS S/S DRILLRp262.000Read moreHSS Extra Length Drills – Steam Tempered
General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
-
8.00mm x 250mm O/A HSS TAPER SHANK DRILLRead more
HSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
8.00mm x 3.15mm HSS CENTRE DRILLRp135.000Read moreHSS Centre Drills – Metric
Metric Series
Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. 60° inclusive angle.
Manufactured to BS 328 : Part 2 : 1986, DIN 333A, ISO 866, ISO 2540, ISO 2541. -
8.00mm x 3.15mm HSS CENTRE DRILL TiN TIPPEDRp152.000Read moreHSS TiN Tipped Centre Drills – metric
Metric Series
Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. TiN coating on working parts. 60° inclusive angle. Manufactured to BS 328 : Part 2 : 1986, DIN 333A, ISO 866, ISO 2540, ISO 2541. -
8.00mm x 315mm O/A HSS S/S DRILLRp328.000Read more
HSS Extra Length Drills – Steam Tempered
General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
-
8.00mm x 315mm O/A HSS TAPER SHANK DRILLRead more
HSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
8.00mm x 350mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills – Sherwood Standard
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to Sherwood Standard. (For BS328 and *DIN1870 lengths See Below).
-
8.00mm x 400mm O/A HSS S/S DRILLRp444.000Read more
HSS Extra Length Drills – Steam Tempered
General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
-
8.00mm x 400mm O/A HSS TAPER SHANK DRILLRead more
HSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
8.00mm x 90DEG CARBIDE SPOTTING DRILLRp391.000Read moreSherwood Solid Carbide Spotting Drills – 90°
Designed for close tolerance hole location. Suitable for continuous production on aluminium, plastics, free cutting steels, cast iron, titanium and some aerospace materials. The stability of carbide makes the tool more rigid and less likely to deflect, maintaining a higher level of accuracy. Operators should note that continuous heavy shock loading may cause the tool to fail due to its brittleness.