Archives: Products
Showing 14097–14112 of 23773 results
-
75mm AL/OX QUICK CHANGE DISCS GRIT 80Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm ALUMINIUM BARREL BOLT C/W SCREWSRead moreAluminium Barrel Bolts
A multi-purpose bolt generally used for internal domestic purposes. Supplied with wood screws.
-
75mm ALUMINIUM FACED MAGNETIC VICE JAWSRead moreKennedy Magnetic Vice Jaws
Profiled Aluminium
Suitable for all steel and iron vices – engineerâs, fitterâs, machine. Quick and easy to fit and remove. -
75mm ANNULAR RING SHANK NAILS (1KG)Read moreAnnular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
75mm ANNULAR RING SHANK NAILS (2KG)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
75mm ANNULAR RING SHANK NAILS (500gm)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
75mm ANNULAR RING SHANK NAILS (5KG)Read more
Annular Ring Shank Nails
Corrosion resistant, prevents woodstaining. Annular ring shank threads ensure that the boards do not cup, the nail heads do not pop and the nails can be driven flush without crushing the surrounding wood.
-
75mm BEARING SEPARATORRead moreKennedy Bearing Separators
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes.
Jaw hardness: 42° – 45° HRC. -
75mm BRASS BARREL BOLT 1″ W C/W BRASS SCREWSRead moreBrass Barrel Bolts
Supplied polished and lacquered, complete with brass wood screws.
-
75mm CARBIDE TIPPED HOLESAWRead moreCarbide Tipped Holesaws
Kennedy® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.
-
75mm CHROME VANADIUM COMBINATION SPANNERRead moreKennedy Industrial Combination Spanners – Metric
Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
75mm CLEAN & STRIP DISC X/COARSERead moreClean & Strip Unitised Discs
High stock removal producing a very good finish. Cleans surfaces faster and more effectively than wire brushes, scrapers or pickling pastes. As there is no metal components used in the manufacture of these high strength cool cutting discs, accidental damage to the work piece is eliminated. Suitable for grinding right into corners, across contours and in hard to reach areas. Ideally suitable for preparation and cleaning of welds, rust removal and removal of discolouration.
Backing Pad M14 Thread -
75mm CLEAT HOOK GALVANISEDRead moreWelded Straight Link Chain
Often used for common everyday uses such as trailer ties and door stays as well as the handling of materials in industry. The chain has the weld placed at the end of each link of chain, side welded version are also available on request. A popular and versatile product. Welded chain is light and strong, ideal for general-purpose application such as park swings, garden use, security etc. Manufactured from mild steel. Supplied in 10m length packs in boxes (other lengths are available on request).
-
75mm CORNER BRACE BZP CSK INSIDE/OUT (PACK 10)Read moreCorner Braces – Countersunk Inside & Outside
Provide essential rigidity to the assemblies and reinforce right angle corner joints. Bright zinc plated steel.
-
75mm CORNER PLATE BZP – E/GALV (PK-10)Read moreCorner Plates
Provide essential rigidity to the assemblies and reinforce the edges of right angle corner joints. Bright zinc plated steel.
-
75mm D/ACTION SPRING HINGES SILVER + FITTINGS-PRRead moreDouble Action Spring Hinges
A very strong and durable hinge, having all the attributes of all alternatives on the UK market at considerably reduced prices. Supplied with screws, spare adjustment pins and cranking bar. Lacquered silver finish. Supplied in pairs.