Archives: Products
Showing 14081–14096 of 23773 results
-
750x440mm RIBBED NYLON DOOR MATRead moreRibbed Nylon Door Mats
With grippa backing to prevent movement under foot. Hard wearing.
-
753052 SANDING SHEETS 60GRIT (PK-10)Read moreSanding Sheets
Packs of 10 in 60 grit, 100 grit and 150 grit.
-
753054 SANDING SHEETS 100 GRIT (PK-10)Read moreSanding Sheets
Packs of 10 in 60 grit, 100 grit and 150 grit.
-
753056 SANDING SHEETS 150 GRIT (PK-10)Read moreSanding Sheets
Packs of 10 in 60 grit, 100 grit and 150 grit.
-
758mm DOUBLE ENDED HAND PANEL BEATING DOLLYRead moreKenendy Panel Beating Dolly – Double-End Hand Dolly
Double-End Hand Dolly
Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish. For reshaping crowned panels and general panel beating. -
75mm (3″) ENGINEERS SQUARERead moreEngineerâs Squares
Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.
Squareness tolerance:
75, 100 and 150mm = ±0.030mm.
225 and 300mm = ±0.040mm.*Supplied in robust case.
-
75mm (3″) ENGINEERS SQUARE BS.939 GRADE BRead moreEngineer’s Squares
Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.
-
75mm (3″) FIBRE FACED MAGNETIC VICE JAWSRead moreKennedy Aluminium Jaw with a Fibre Face
Aluminium Jaw with a Fibre Face
-
75mm (3″) RUBBER FACED MAGNETIC VICE JAWSRead moreKennedy Aluminium Jaw with a Rubber Face
Aluminium Jaw with a Rubber Face
-
75mm AL/OX QUICK CHANGE DISCS GRIT 100Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 120Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 180Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 36Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 40Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 50Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.
-
75mm AL/OX QUICK CHANGE DISCS GRIT 60Read moreYork Quick Change Screw Fitting Discs
For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in two abrasive types, aluminium oxide for general-purpose use and zirconia alumina for grinding and finishing of stainless steel. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC⢠system holders.