Archives: Products

Showing 14033–14048 of 23773 results

70mm CARBIDE TIPPED HOLESAW

Carbide Tipped Holesaws

KennedyÂ® carbide tipped hole saws last up to 10 times longer than standard hole saws and resist wear and heat caused by friction much better than traditional holesaws, making them the best choice for cutting tough material such as tile, stainless steel. Use standard arbors.

Read more
70mm CHROME VANADIUM COMBINATION SPANNER

Kennedy Industrial Combination Spanners – Metric

Metric
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982.

Read more
70mm DEEP IMPACT SOCKET 1″ SQ DR

Kennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Deep Length, 6-Point

1â Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
70mm DIA. (2.3/4″) BI-METAL HOLESAW
Rp269.000

Constant Pitch Bi-Metal HSS Holesaws

Featuring a constant pitch – first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring an hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch.38mm (11/2â) cutting depth.

Read more
70mm DIA. (2.3/4″) BI-METAL V/P HOLESAW
Rp269.000

Variable Pitch Bi-Metal HSS Holesaws

For wood, steel, brass, bronze, cast iron, aluminium and plastic. Aggressive cutting action and M3 HSS cutting teeth to give a very smooth finish. Cuts up to 40% faster then constant pitch saws. The varying tooth pitch gives substantial reductions in noise by disrupting harmonics. Tooth life is greatly extended, as is battery life when used with a cordless drill. Suitable for all uses: engineering, construction and maintenance.4 to 6 teeth per inch.
28.5mm (11/8â) cutting depth.

Read more
70mm IMPACT SOCKET 1-1/2″ DR

Chrome Molybdenum Impact Sockets: 1 1/2″ Drive Metric Size, Standard Length, 6-Point

1 1/2″ Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
70mm IMPACT SOCKET 1″ SQDR

Kennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

Read more
70mm OPEN JAW SLOGGING WRENCH

Kennedy Open Jaw Slogging Spanners

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.

Read more
70mm RING SLOGGING WRENCH

Ring Slogging Spanners

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.

Read more
70mm SOCKET 1″ SQ DR

Kennedy Bi-Hexagon Standard Sockets, 1″

Bi-hexagon. (12 point). This range of 1â (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design gives a higher torque than normal sockets. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Read more
70mm SPARK RESISTANT O/END SLOGGING WRENCH Al-Br

Kennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Open End Slogging Wrench

Open End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

Read more
70mm SPARK RESISTANT R/END SLOGGING WRENCH Al-Br

Aluminium-Bronze Spark-Resistant Safety Tools: Ring End Slogging Wrench

Ring End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

Read more
70mm WORKSHOP OPEN END SPANNER

Kennedy Open Jaw Spanners – Single-Ended

Single-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 894.

Read more
70x10mm 30SWG SHAFT MOUNTED BRUSH

Wire Wheels

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes – Shaft Mounted
Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG.

Read more
70x125x35mm RUBBER SANDING BLOCK

Kennedy 1/4 Sheet Hand Sanding Pad

Made from compound rubber. With curved and flat sides. Complete with locating spikes. Suitable for all types of coated abrasive sheets. Accepts a standard 230 x 280mm sheet split down into quarters across the width.

Read more
70x15mm 30SWG SHAFT MOUNTED BRUSH

Wire Wheels

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.
Circular Brushes – Shaft Mounted
Suitable for use in power drills. Most suitable for hard to reach areas and grooves. 6mm Shanks. 30 SWG.

Read more