Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 13553–13568 of 23773 results

  • 7-DRAWER CABINET YELLOW/GREY

    Yamoto Roller Cabinet – 7 Drawer

    7 Drawer Roller Cabinet
    Body made from 1mm steel panels with 0.8mm drawers. Powder coated yellow/grey with aluminium drawer pulls. Fully opening drawers. Smooth running 350mm ball bearing drawer slides. Rubber top mat and foam drawer liners. Fully locking. 100 x 25mm heavy duty castors, with two brakes. Strong 450mm wide handle.
    Overall dimensions (W x D x H): 689 (760 with handle) x 459 x 780mm (915 with castors).
    Drawer sizes (W x D x H):
    4@ 590 x 409 x 49mm.
    2@ 590 x 409 x 101.5mm.
    1@ 590 x 409 x 206.5mm.

    Read more
  • 7-DRAWER EXTRA HEAVY DUTY CABINET

    Kennedy Extra Deep, Heavy Duty Roller Cabinet

    7 Drawer
    Heavy gauge steel, welded and riveted to give an extremely rigid construction. Corrosion resistant powder coated finish. Locking mechanism locks all the closed drawers which have individual safety catches to prevent accidental opening. Four heavy duty castors, two fixed and two swivel which when combined with the heavy-duty side handle enable the user to move it with ease. All drawers have smooth running ball bearing drawer slides and aluminium edged handles.

    Drawer sizes (W x D x H):
    1@ 560 x 390 x 40mm.
    4@ 560 x 390 x 65mm.
    1@ 560 x 390 x 95mm.
    1@ 560 x 390 x 205mm.

    Read more
  • 7-DRAWER EXTRA LARGE TOOL ROLLER CABINET

    Kennedy Extra Large Roller Cabinets – 7 Drawer

    7 Drawer Roller Cabinet
    Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castor’s, fitted with two brakes. Castor’s are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
    Internal drawer dimensions
    Bottom compartment (W x D x H): 400 x 460 x 300mm. 400 x 460 x 415mm
    Drawer sizes (W x D x H):
    4@ 580 x 415 x 50mm.
    2@ 580 x 415 x 100mm.
    1@ 580 x 415 x 150mm.
    Uses 14” drawer slides. Type B lid stays.

    Read more
  • 7-DRAWER ROLLER CABINET

    Senator Roller Cabinets – 7 Drawer

    7 Drawer
    Double thickness side walls with welded joints and a hard wearing epoxy powder coating. I-Beam draw slides with double sliders on base drawer. 100mm rubber castors with brakes fitted to two end castors. Fully locking. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed.
    Overall dimensions ­(W x D x H): 670 x 460 x 885mm.
    Drawer sizes (W x D x H):
    4@ 590 x 410 x 50mm.
    2@ 590 x 410 x 100mm.
    1@ 590 x 410 x 200mm.
    Uses 16″ drawer slides.

    Read more
  • 7-DRAWER ROLLER CABINET – RED

    Yamoto Roller Tool Cabinets

    Double wall side panels and welded joints for added rigidity. Solid one piece I-beam drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 100mm rubber castors, two brakes. Overall dimensions: 850 x 690 x 460mm. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded, and should only ever be pushed.

    3 Drawer
    Bottom compartment (W x D x H): 610 x 430 x 355mm.
    Drawer sizes (W x D x H): 3@ 590 x 410 x 100mm. Uses 16” drawer slides.

    5 Drawer
    Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 100mm.
    1@ 590 x 410 x 200mm. Uses 16” drawer slides.

    7 Drawer
    Internal drawer dimensions (W x D x H): 4@ 590 x 410 x 50mm. 2@ 590 x 410 x 100mm. 1@ 590 x 410 x 200mm. Uses 16” drawer slides.

    Read more
  • 7-DRAWER STAINLESS ROLLER CABINET

    Stainless Steel Roller Cabinet

    Manufactured from heavy gauge stainless steel with double wall construction side panels and welded joints for added rigidity. Quick release smooth running ball bearing drawer slides. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded and should only ever be pushed. Suitable for use in health and catering environments.

    Drawer sizes (W x D x H):
    5@ 597 x 428 x 90mm.
    1@ 597 x 428 x 135mm.
    1@ 597 x 428 x 180mm.

    Read more
  • 7-PCE 1″ SQ. DR. IMPACT SOCKET SET

    Kennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Deep Length, 6-Point

    7 Piece Impact Socket Set
    Socket sizes: 27, 30, 32, 33, 36, 41 and 46mm.

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
  • 7-PCE BA NUT SPINNER SET

    Kennedy Nut Spinners – Sets

    Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles. 6” (150mm) combined socket and blade length. Overall length: 230mm.

    Read more
  • 7-PCE BOX SPANNER SET 6-19mm C/W TOMMY BARS

    Kennedy Box Spanners – Sets

    Sets
    Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar.

    7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
    6 Piece AF: 1/4″ x 5/16″, 5/16″ x 3/8″, 3/8″ x 7/16″, 1/2″ x 9/16″, 9/16″ x 5/8″ and 11/16″ x 3/4″.
    6 Piece BA: 0 x 1, 2 x 3, 4 x 5, 6 x 7, 8 x 9, 10BA.

    Read more
  • 7-PCE HEX DRIVER IMPACT SOCKET SET 3/8″ SQ. DR.

    Kennedy Chrome Molybdenum Hex Driver Impact Sockets 3/8″ Sq. Dr. – 7 Piece Set

    7 Piece Set
    Hexagon sizes: 4, 5, 6, 7, 8, 10 and 12mm.
    Conforms to DIN 3129.

    Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

    Read more
  • 7-SEG MICRO SNAP-OFF BLADES (PK-100)

    Kennedy Snap-off Knife Blades

    Kennedy Industrial quality knife blades have a superior edge hardening for longer tool life and sharper edge. Best value with longer working between blade changes and with easy, safe segment-snap to renew leading edge.

    18 x 100mm – 8 segment
    9 x 55mm – 8 segment
    9 x 91mm – 13 segments

    Read more
  • 7.0 SCR SHORT 2FL SLOT DRILL-8% CO

    SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 28, Short – Uncoated

    Series 28 – Short Series
    Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 SCR STANDARD END MILL-TICN-8% CO

    SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – TiCN Coated

    Series 36 – Regular Series, TiCN Coated
    Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 SCR STD END MILL-8% CO

    SwissTech HSS-Co 8% Threaded Shank End Mills 4 & 6 Flute: Series 36, Regular – Uncoated

    Series 36 – Regular Series
    Dimensions to DIN 844. Centre cutting. Threaded shank to DIN 1835D. Shank cutting diameter to +0.04 -0.0.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 WELDON SHORT 2FL SLOT DRILL-8% CO
    Rp392.000

    SwissTech HSS-Co 8% Weldon Shank Slot Drills 2 Flute: Series 01, Short – Uncoated

    Series 01 – Short Series
    Dimensions to DIN 327. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
  • 7.0 WELDON SHORT 3FL SLOT DRILL-8% CO

    SwissTech HSS-Co 8% Threaded Shank Slot Drills 2 Flute: Series 05, Short – Uncoated

    Series 05 – Short Series
    Dimensions to DIN 327. Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6.

    Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping