Archives: Products
Showing 13537–13552 of 23773 results
-
6x4mm CONICAL 60DEG. CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Conical 60° Inc. Angle
Conical 60° Inc. Angle
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
6×5/8″ SILVER-TT POZI CSK WOODSCREW BZP (200)Read moreMatlock Pozidriv® Woodscrews: Silver-TT⢠Twin Thread
Silver-TT⢠Twin Thread Woodscrews
High helix double thread, plated to five microns for greater corrosion-resistance. 35° point angle usually needs no pilot. -
6x50mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
6x50mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
6x5mm BALL SHAPE BURR DOUBLE CUTRead moreYork Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
6x5mm BALL SHAPE C/B BURR CUT 9Read moreYork Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
6x60mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
6x60mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
6x6mm BALL SHAPE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 3 – Rapid Cut
For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
6x7BA DOUBLE ENDED BOX SPANNERRead moreKennedy Box Spanners – BA
BA
Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. -
6x7mm DROP FORGED OPEN END SPANNERRead moreSenator Open Ended Spanners – Metric
Metric
Drop forged steel with 15° cranked open ends. Conform to ASME B107.39. -
6x8mm INVERTED CONE CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Inverted Cone
Inverted Cone
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
7 LED ALU SOFT GRIP TORCH REQUIRES (2xD) BATTSRead moreEdison 3 LED Aluminium Soft Grip Torch
Water and impact resistant anodized aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with “O” rings.
-
7 LED SWIVEL HEADLIGHTRead moreLED Swivel Head Torch
LSH070
Adjustable head torch with three lighting levels. Gives an ultra-bright white light provided by 7 LEDs. Five stage tilting head. Adjustable top and side straps for total comfort and stability. Ideal torch for any low light activity.
Batteries: 3x AAA (not supplied). -
7-DIAL PIVOT HEAD TELESCOPIC SPRAY LANCERead moreSpray Lance
This spray lance has a pivoting head and telescopic body, making it an invaluable asset when watering hanging baskets, window boxes etc. in any location.
The telescopic arm expands from: 90cm (36â) to 135cm (53â).
Spray settings:
⢠Soaker.
⢠Shower.
⢠Centre.
⢠Jet.
⢠Flat.
⢠Mist.
⢠Cone. -
7-DRAWER CABINET BLUE/GREYRead moreSenator Roller Cabinet – 7 Drawer
7 Drawer
Body made from 1mm steel panels with 0.8mm drawers. Powder coated finish in blue/grey with aluminium drawer pulls. Fully opening drawers for extra accessibility. Quick release smooth running 350mm ball bearing drawer slides. Rubber top mat and foam drawer liners. Fully locking. 100 x 25mm heavy duty castors, fitted with two brakes. Strong 450mm wide handle. Drawer loads should be evenly distributed. Roller cabinets should only ever be pushed.
Overall dimensions (W x D x H): 689 – 760 with handle x 459 x 780mm – 915 with castors.
Drawer sizes (W x D x H):
4@ 590 x 409 x 49mm,
2@ 590 x 409 x 101.5mm,
1@ 590 x 409 x 206.5mm.
