Archives: Products
Showing 13281–13296 of 23773 results
-
65mm IMPACT SOCKET 1″ SQDRRead moreKennedy Chrome Molybdenum Impact Sockets: 1″ Drive Metric, Standard Length, 6-Point
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
65mm LIGHT NARROW BUTT HINGES S/COLOUR (PR)Read moreLight Butt Hinges
For general purpose use and in domestic situations. Self colour. Supplied in pairs.
-
65mm OPEN JAW SLOGGING WRENCHRead moreKennedy Open Jaw Slogging Spanners
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
-
65mm OVAL BRAD NAILS (1KG)Read moreOval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
65mm OVAL BRAD NAILS (2KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
65mm OVAL BRAD NAILS (500gm)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
65mm OVAL BRAD NAILS (5KG)Read more
Oval Brad Nails
Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.
-
65mm RING SLOGGING WRENCHRead moreRing Slogging Spanners
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
-
65mm ROUND WIRE NAILS (1KG)Read moreRound Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
65mm ROUND WIRE NAILS (2KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
65mm ROUND WIRE NAILS (500gm)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
65mm ROUND WIRE NAILS (5KG)Read more
Round Wire Nails
Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm (1″ to 6″). Available in 500g, 1kg, 2kg and 5kg packs. -
65mm SOCKET 1″ SQ DRRead moreKennedy Bi-Hexagon Standard Sockets, 1″
Bi-hexagon. (12 point). This range of 1â (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design gives a higher torque than normal sockets. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
65mm SPARK RESISTANT O/END SLOGGING WRENCH Al-BrRead moreKennedy Professional Aluminium-Bronze Spark-Resistant Safety Tools: Open End Slogging Wrench
Open End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
-
65mm SPARK RESISTANT R/END SLOGGING WRENCH Al-BrRead moreAluminium-Bronze Spark-Resistant Safety Tools: Ring End Slogging Wrench
Ring End Slogging Wrench
With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 – 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential. -
65mm WORKSHOP OPEN END SPANNERRead moreKennedy Open Jaw Spanners – Single-Ended
Single-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 894.