Archives: Products
Showing 3969–3984 of 23773 results
-
12x50mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
12x60mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
12x60mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
12x6mm CONICAL 90DEG. CARBIDE BURR CUT 9Read moreKennedy Carbide Burrs – Conical 90° Inc. Angle
Conical 90° Inc. Angle
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
12x70mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
12x70mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
12x80mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
12x80mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
12x90mm METRIC EXTRACTABLE DOWEL PIN C/W AIR FLATRead moreKennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
-
12x90mm METRIC PLAIN DOWEL PINRead moreQuality Industrial Dowel Pins – Metric
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.006
4 – 6mm = +0.004 +0.009
8 – 10mm = +0.006 +0.0012
12 – 16mm = +0.007 +0.0015. -
13 K20 BRAZED TOOLRead moreKennedy Cranked Round Nosed Turning Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
13 P20/P30 BRAZED TOOLRead more
Kennedy Cranked Round Nosed Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
13 x 14mm FLARE NUT RINGSPANNERRead moreKennedy Industrial Flared Nut Ring Spanners – Metric
Metric: Conform with ANSI B107.9M.
Conform to ASME B107.4. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
13 x 15mm PROF FLARE NUTRING SPANNERRead moreKennedy Professional Flared Nut Ring Spanners – Metric
Metric: Conform with ANSI B107.9M.
Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
13-24mm FLEXI RING END SOCKET SET 1/2″ S/D 8PCRead moreKennedy Flexi-Ring End Sockets, 1/2″ – Set, 8 Pieces
Made from polished chrome vanadium. These tough flexi-ring end sockets are designed to allow access over long studs and for awkwardly positioned nuts and bolts. Swivels through 220°.
8 Piece Metric Set Contents:
13, 14, 15, 16, 17, 19, 22, and 24mm. Supplied with a sturdy hanging rail. -
13-DRAWER X/LARGE EXTRA DUTY CABINETRead moreKennedy Extra Deep, Extra Large, Heavy Duty Roller Cabinet
13 Drawer
Heavy gauge steel, welded and riveted to give extremely rigid construction. The two-part epoxy powder paint finish gives excellent corrosion resistance and ensures durability. Central locking system. Heavy duty castor’s and side handle designed to cope with the extra large size and weight. Drawers have smooth running ball bearing drawer slides and rigid aluminium edged handles.Drawer sizes (W x D x H):
2@ 560 x 390 x 95mm. 1@ 305 x 390 x 95mm.
4@ 560 x 390 x 65mm. 3@ 305 x 390 x 65mm.
1@ 560 x 390 x 205mm. 1@ 305 x 390 x 180mm.
1@ 305 x 390 x 205mm.