Archives: Products
Showing 3825–3840 of 23773 results
-
12mm x 13mm PROFESSIONALO/E SPANNERRead moreKennedy Professional Open Ended Spanners
Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance.
Conform to ASME B107.39 -
12mm x 14mm CH/VANADIUM O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Metric
Metric
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
12mm x 55mm FLAT BIT SKT1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
12mm x 55mm HEX BIT SOCKET 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
12mm XP-90C WELDON END MILLRead moreIndexa XP-90C âAPTâ 90° Shell Mills – For AP_T 10 Inserts
XP-90C End Mills For AP_T 10 Inserts
Positive 90° approach milling cutter, using size 10/16 inserts allowing depth passes and high feed per teeth. Torx screw allows for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
Insert Size: APXT 10. Feed Per Tooth (Fz) mm: 0.05 – 0.20. -
12mmx0.60x2500M GREEN EXTRUDED POLY. STRAPPINGRead morePolyester Strapping
A low creep factor enables excellent retention of applied load, while ease of application and disposal enables fast efficient packaging by manual or automatic process.
-
12mmx0.68x2200M GREEN EXTRUDED POLY. STRAPPINGRead morePolyester Strapping
A low creep factor enables excellent retention of applied load, while ease of application and disposal enables fast efficient packaging by manual or automatic process.
-
12mmx10mm KNUCKLE CLAMPRead moreKennedy Magnetic Stand Fitments – Spare Knuckle Assemblies
All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.
Spare Knuckle Assemblies
For connecting columns and crossbars -
12mmx110mm O/A HSS-COBALT 4FL PL/SH END MILLRp643.000Read moreSherwood HSS-Co Plain Shank Milling Cutters 4 Flute, Long Series – Metric
Long Series
Centre cutting, used for profile milling, milling keyways and producing open slots. Bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.Metric Tolerances
Nominal Dia.: Up to 38mm. Limits of Tolerance: +0.0630, -0.0130.
Nominal Dia.: Above 38mm. Limits of Tolerance: +0.1250, -0.0000. -
12mmx12M PTFE THREAD SEALING TAPE BS6920Read moreP.T.F.E. Tape
Gas Type: 12mm x 5m roll. For gas and hot water pipes (not for potable water). Made to BS EN 751:3.
Water Type: 12mm x 12m roll. For hot and cold water pipes. Made to BS 6920 & BS 7786.
P.T.F.E. Thread Sealing Tape: 25mm x 12m roll. Made to EN571. -
12mmx13mm CHROME VANADIUM O/E SPANNERRead moreYamoto Industrial Open Ended Spanners – Metric
Metric
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.39. -
12mmx13mm DOUBLE ENDED BOX SPANNERRead moreKennedy Box Spanners – Metric
Metric
Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. -
12mmx13mm OFFSET RATCHETRING SPANNERRead moreKennedy Reversible Ratchet Ring Wrenches, 25° Offset – Metric
25° Offset: Metric
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.
*Single hexagon -
12mmx13mm STRAIGHT RATCHET RING WRENCHRead moreKennedy Reversible Ratchet Ring Wrenches, Straight – Metric
Straight: Metric
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings. -
12mmx13mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. -
12mmx14mm WORKSHOP OPEN END SPANNERRead moreOpen Jaw Spanners – Double-Ended
Double-Ended
Made from chrome vanadium steel with a black oxidised finish. Conform to DIN 895.