Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 3761–3776 of 23773 results

  • 12mm HSS PLAIN SHANK CORNER ROUNDING CUTTER

    Sherwood HSS Plain Shank Corner Rounding Cutters

    Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2. Manufactured to works standards. 5° RH Flutes. Bright finish, straight helix. Radii tolerance: ± 0.005”.

    Read more
  • 12mm HSS PLAIN SHANK T-SLOT CUTTER
    Rp1.802.000

    Sherwood HSS Plain Shank T-Slot Cutters

    Used for machining T-slots on slide tables, fixtures etc. to DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2” have 6 flutes and 18mm and 5/8” upwards have 8 flutes. Made to DIN 851. Flute form 12° RH/LH

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 12mm HSS SC/SH B/N SLOT DRILL

    Sherwood HSS Threaded Shank Ball Nose 2 Flute End Mills (Slot Drills) – Metric

    Short Series Type B210T
    Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 12mm HSS SC/SH CORNER ROUNDING CUTTER
    Rp2.751.000

    Sherwood HSS Threaded Shank Corner Rounding Cutters – Metric

    Designed to produce convex corner radii. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to works standards. 5° RH Flutes.
    Bright finish, straight helix. Radii tolerance: ± 0.005”. Shank to DIN 1835/D.

    Read more
  • 12mm HSS SC/SH END MILL

    Sherwood HSS Threaded Shank End Mills Multi Flute – Metric

    Short Series E410T
    Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm ~. Tolerance: +0.1250, -0.0000.

    Read more
  • 12mm HSS SC/SH SLOT DRILL

    Sherwood HSS Threaded Shank Slot Drills 2 Flute – Metric

    Short Series S210T – Metric
    Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 12mm HSS SC/SH T-SLOT CUTTER
    Rp783.000

    Sherwood T-Slot Cutters Threaded Shank HSS – Metric

    Used for machining T-slots on slide tables, fixtures etc., to DIN 650. For milling structural, carburized and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2″ have 6 flutes and 18mm and 5/8″ upwards have 8 flutes. Made to DIN 851. Shank to DIN 1835/D. Flute form 12° RH/LH.

    Metric Limits of Tolerance
    Diameter: +0.13 – 0.13
    Length: +0.13 – 0.13

    Read more
  • 12mm HSS-COBALT 2FL ST/SH SLOT DRILL 110mm O/A
    Rp689.000

    Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Long Series

    Long Series
    Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Read more
  • 12mm HSS-COBALT 2FL ST/SH SLOT DRILL 83mm O/A
    Rp527.000

    Sherwood HSS-Co Plain Shank Milling Cutters 2 Flute – Regular Length

    Regular Length
    Non-centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.

    Read more
  • 12mm HSS-COBALT 3FL SC/SH SLOT DRILL

    Sherwood HSS-Co 5% Threaded Shank Slot Drills 3 Flute, Regular Series – Metric

    Regular Series Type 5321T
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 12mm HSS-COBALT L/S SC/SH END MILL

    Sherwood HSS-Co 5% Threaded Shank End Mills 4, 6 & 8 Flute, Long Series – Metric

    Long Series Type E431T
    Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.
    Manufactured to BS 122 : Part 4 : 1980.

    Metric Tolerances
    Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.
    Diameter: Over 38.00mm. Tolerance: +0.1250, -0.0000.

    Read more
  • 12mm HSS-COBALT L/S SC/SH KNUCKLE RIPPER

    Sherwood HSS-Co 5% Threaded Shank Coarse Pitch Roughing Cutters, Long Series – Inch

    Long Series Type K432T

    Knuckle Form
    For use when high metal removal rates area required. Bright finish. Flute type: 25° spiral, oughing truncated. Shank diameter to js14.

    Metric Tolerances
    Diameter ± 0.127mm

    Read more
  • 12mm HSS-COBALT L/S SC/SH SLOT DRILL

    Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%, Long – Metric

    Long Series Type S231T – Metric
    Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.

    Metric Tolerances
    Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033
    Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038
    Diameter: Over 6.00 ~ up to 10.00. Tolerance: +0.025 -0.046
    Diameter: Over 10.00 ~ up to 18.00. Tolerance: +0.033 -0.058
    Diameter: Over 18.00 ~ up to 30.00. Tolerance: +0.041 -0.071
    Diameter: Over 30.00 ~ . Tolerance: + 0.051 -0.089

    Read more
  • 12mm HSS-COBALT PM 4FL WELDON END MILL P/POWER

    SwissTech HSS-E PM Coated 4 Flute End Mills: Series 95, Regular – Peak Power Coated

    Series 95 – Regular
    Centre cutting. Weldon shank to DIN 1835B. Shank diameter to h6. Dimensions to DIN 844.

    The latest enhancement of the SwissTech range, these cutters deliver excellent performance when cutting difficult materials, even at high speeds.

    Manufactured from premium PM (Powder Metallurgy) tool steel, with an excellent cutting geometry. Designed for strength and rigidity, minimising vibration in high speed cutting applications and providing improved productivity.

    These cutters are further enhanced by the SwissTech Peak Power? coating, suiting dry cutting applications, having higher oxidization resistance and hot-hardness than conventional TiALN or TiCN coatings, withstanding the high thermal loads associated with high speed cutting applications.

    Read more
  • 12mm HSS-COBALT PM L/S WELDON F/P RIPPER TiALN

    Swisstech Weldon Shank HSS-E PM TiALN Coated Fine Pitch Ripper Cutters: Series 96, Long

    Series 96 – Long Series
    Dimensions to DIN 844. Centre cutting. Shank to DIN 1835B. Cutting diameter to js12. Shank diameter to h6.

    The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

    Read more
  • 12mm HSS-COBALT PM L/S WELDON H/HELIX E/MILL TiALN

    SwissTech Weldon Shank HSS-E PM TiALN Coated High Helix Cutters: Series 92 – Long

    Series 92 – Long Series
    Dimensions to DIN 844. Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to k10. Shank diameter to h6.

    The combination of HSS-E PM and TiALN provides a cutter that is ideally suited to dry and semi-dry machining of materials up to 45 HRC, stainless steels and Aerospace alloys.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping