Archives: Products
Showing 3681–3696 of 23773 results
-
125mmx37mm T/P SWIVEL CASTOR(ZINC)GRT & BRAKERead moreGrey Rubber Tyre, Plastic Centre Wheel with Plain Bore – Swivel Type with Top Plate, Zinc Finish
Non-marking, quiet running ‘cushioned’ rubber tyre. Suitable for use on hard floors (cement, tiles, etc) and for humid environments where medium harsh chemicals may be present. Not recommended for use with organic solvents, chlorinated substances, hydrocarbons or mineral oils. Operating temperature range -20C to 60C.
-
125mmxM14 THREADED 30SWGARBOR CUP BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Cup Brushes
Multi purpose brush for removal of rust, paint and burrs. Ideally suited for use on bench machines and angle grinders.
30 SWG -
125×1.6×22.23mm AS46 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
125x1x22.23mm AS60 INOX BF CUT-OFF DISCRead moreInox Cut-Off Discs
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Inox Cut-Off Discs
For stainless steel (iron, chlorine and sulphur-free).All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the “oSa” (The Organisation for the Safety of Abrasives) mark of approval. “oSa” is an association of the world’s leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. “oSa” marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.
-
125×22.23mm G-VA POLISHING FLAP DISCRead moreG-VA Polishing Flap Disc
Manufactured with high quality felt flaps. To be used with polishing compounds to produce polished mirror
finishes on metal. -
125x22x30mm 30SWG WIRE BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Circular Brushes – Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Order side plates separately. (See below).
30 SWG -
125x25x5mm AL/OX MEDIUM REAMER STONERead moreReamer Stone
Aluminium Oxide: Man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.
-
125x30x30mm 30SWG WIRE BRUSHRead moreWire Wheels
Industrial rotary wire wheels and brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine
tools and flexible drives.
Circular Brushes – Plain Bore
Suitable for removal of rust, paint and dirt from heavily covered parts. Order side plates separately. (See below).
30 SWG -
125x3x22.23mm A24RBF DPCCUTTING DISCRead moreType 42 Depressed Centre Cutting
Type 42 Depressed Centre Cutting
For use with all portable grinders/cut-off machines. Not to be used for âfree handâ cutting and importantly not to be used for grinding.
Grade A24/A46 – For general purpose cutting on metals.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
125x3x22.23mm A24RBF FLAT CUTTING DISCRead moreType 41 Flat Reinforced Cutting
Type 41 Flat Reinforced Cutting
For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatibility. Not to be used for wet cutting.
Grade A24/A36 – For general-purpose cutting on metals.
Grade C24 – For general-purpose cutting on stone.Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
125x50x78mm GRADE 2 VEE BLOCKS (PR)Read moreOxford Precision Vee Blocks
Matched and numbered pairs of closed grained iron castings accurately machined. Precision 90° vee blocks. Supplied as a pair.
-
125×6.30mm (1/4″) SQUARE HEAD CENTRE PUNCHRead moreKennedy Square Head Centre Punches
Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece.
Conform to BS 3066.*Round headed.
-
125x6x22.23mm A30TBF DPCGRINDING DISCRead moreDepressed Centre & Flat Reinforced Cutting & Grinding Discs
Type 27 Depressed Centre Grinding
For use with all portable angle grinders. Not to be used for âfree handâ or wet grinding.
Optimum angle for use 25 to 35°.
Grade A30/AS30 – For general-purpose use on metals.
INOX – For use on stainless steel (iron, chlorine and sulphur free).Depressed Centre & Flat Reinforced Cutting & Grinding Discs
All Kennedy Depressed Centre and Flat Reinforced Cutting Wheels now carry the âoSaâ (The Organisation for the Safety of Abrasives) mark of approval. âoSaâ is an association of the worldâs leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels.
Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. âoSaâ marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA. -
125×9.50mm (3/8″) ROUND HEAD CENTRE PUNCHRead moreKennedy Square Head Centre Punches
Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece.
Conform to BS 3066.*Round headed.
-
127 x 22mm AL/OX SANDINGDISCS P100Read moreKennedy Fibre Discs – Aluminium Oxide
Aluminium Oxide
Designed for a wide range of applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders.
Size: 100mm Diameter x 16mm Bore
Max RPM: Max 12,400rpm -
127 x 22mm AL/OX SANDINGDISCS P120Read moreKennedy Fibre Discs – Aluminium Oxide
Aluminium Oxide
Designed for a wide range of applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders.
Size: 100mm Diameter x 16mm Bore
Max RPM: Max 12,400rpm