Archives: Products
Showing 3169–3184 of 23773 results
-
11×9.5mm BALL SHAPE BURR DOUBLE CUTRead moreYork Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
11×9.5mm BALL SHAPE C/B BURR CUT 9Read moreYork Carbide Burrs – Ball Shape
Ball Shape
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:
Cut 6 – Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 – Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. -
11x95mm LATHE CHUCK KEYRead moreIndexa Lathe Chuck Keys
Supplied as standard with all Indexa lathe chucks manufactured from high quality steel, ground finish body, sliding T-bar and spring return fitted to square drive. Suitable for use with all other makes of square drive adjusting lathe chucks.
-
-
12 K20 BRAZED TOOLRead moreKennedy Cranked Round Nosed Turning Tools – K20
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
12 P20/P30 BRAZED TOOLRead more
Kennedy Cranked Round Nosed Turning Tools – P30
Brazed Tip Turning & Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates. -
12 x 10 x 300mm RECTANGULAR KEY STEELRead moreKennedy Industrial Key Steel – Rectangular: Metric
Rectangular â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
12 x 13mm DOUBLE ENDED SWIVEL SOCKETRead moreKennedy Swivel End Socket Wrenches
Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point). Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.
-
12 x 14mm FLARE NUT RINGSPANNERRead moreKennedy Industrial Flared Nut Ring Spanners – Metric
Metric: Conform with ANSI B107.9M.
Conform to ASME B107.4. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
12 x 14mm PROF FLARE NUTRING SPANNERRead moreKennedy Professional Flared Nut Ring Spanners – Metric
Metric: Conform with ANSI B107.9M.
Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
12 x 8 x 300mm RECTANGULAR KEY STEELRead moreKennedy Industrial Key Steel – Rectangular: Metric
Rectangular â Metric
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.
Inch manufactured from: BS46 PART 7 1958 grade steel.
Length: 300mm and 12â.
Other sizes available on request. -
12- TONNE 465mm MAXIMUM HEIGHT BOTTLE JACKRead moreKennedy Hydraulic Bottle Jacks
With large cast iron bases with a steel cylinder housing and an adjusting notched saddle. Fitted with an overload protection valve. Two piece âpumpingâ handle also operates hydraulic release. Use on a firm level surface, do not work under the vehicle until another means of support, such as axle stands, are used. Models B234, B337 and B541 are supplied in a robust blow moulded carry case. Complies with the EC Machinery Directive. GS and TUV approved. (Load ratings are âmetric tonnesâ i.e. 1 tonne = 1,000kg). All supplied with spare seals.
-
12-25mm 45 DEG TIP REVERSIBLE CIRCLIP PLIERRead moreKennedy Reversible Circlip Pliers: 45° Angled Jaw
45° Angled Jaw
These straight and bent nose pliers are reversible for both internal and external circlip insertion and removal, made from high grade carbon steel with comfortable insulated handles. -
12-25mm STRAIGHT REVERSIBLE CIRCLIP PLIERRead moreReversible Circlip Pliers: Straight Jaw
Straight Jaw
These straight and bent nose pliers are reversible for both internal and external circlip insertion and removal, made from high grade carbon steel with comfortable insulated handles. -
12-42mm PLASTIC PIPE CUTTERRead moreKennedy Plastic Pipe Cutters
Stainless steel blade. Diecast alloy body. Extra wide lower jaws for easy production of 90° cuts. Guillotine action ensures a clean cut every time. Handle retaining loop for compact storage and blade safety. Replaceable blade. Not suitable for cutting metal.
-
12-42mm STAINLESS STEEL BLADE FOR PIPE CUTTERRead moreKennedy Plastic Pipe Cutters
Stainless steel blade. Diecast alloy body. Extra wide lower jaws for easy production of 90° cuts. Guillotine action ensures a clean cut every time. Handle retaining loop for compact storage and blade safety. Replaceable blade. Not suitable for cutting metal.
