Archives: Products
Showing 19057–19072 of 23773 results
-
M2x0.4 WHITE ST 371 HSS-EV NIT BLIND TAPRead moreHSS âWhite Ringâ Taps
Straight Flute – HSS-EV Nitride Finish
For blind holes. Plug/bottoming lead to
DIN form C (2 x P to 3 x P).
Tapping tolerance to 6HX. -
M2x0.4 YELLOW SP/FL 371 HSS-EV OX TAPRead moreHSS-EV ‘Yellow Ring’ Taps
Spiral Flute – HSS-EV Oxidised Finish
For blind holes.
Taper lead to DIN form C (3 x P).
Tapping tolerance:
Spiral flute to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings -
M2x0.40 YELLOW SP/PT 371 HSS-EV OX TAPRead moreHSS-EV ‘Yellow Ring’ Taps
Spiral Point/Gun Nose –
HSS-EV Oxidised Finish
For through holes.
Taper lead to DIN form B.
(3.5 x P to 5.5 x P).
Tapping tolerance to 6H.Suitable for the following Material Groups;
1.1
Mild soft steel & free machining non-alloy low carbon steel.
1.2
Non-alloy case hardening, structural & low to medium carbon steel.
1.3
Non-alloy, plain and medium carbon steel and castings -
M3 x 10 A2 ST/ST SKT BUTTON HEAD SCREWRead moreQualfast Socket Head Button Screws: ISO Metric – A2 Stainless Steel
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. For high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
Dimensions to BS EN ISO 7380 -
M3 x 10 A2 ST/ST SKT HEAD C/SUNK SCREWRead moreQualfast Socket Head Countersunk Screws: ISO Metric – A2 Stainless Steel
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to DIN7991 -
M3 x 10 A2 ST/ST SKT HEAD CAP SCREWRead moreQualfast Socket Head Cap Screws: ISO Metric – A2 Stainless Steel
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
-
M3 x 10 A2 ST/ST SKT SETSCREW PLAIN CUPRead moreQualfast Socket Set Screws: ISO Metric, A2 Stainless Steel – Plain Cup
Plain Cup
High tensile alloy steel. Grade 14.9. DIN916
For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical. -
M3 x 10 FLANGE SKT BUTTON HEAD SCREW (10.9)Read moreQualfast Socket Head Flange Button Screws: ISO Metric – Standard (Self-Colour)
An extra wide flange below the button head makes these fasteners ideal for fixing strips cover plates and sheet metal housings that require a greater load spread.
Dimensions to BS EN ISO 898/1. Grade 10.9 DIN 7380 -
M3 x 10 SKT BUTTON HEAD SCREW (10.9)Read moreQualfast Socket Head Button Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. For high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
Dimensions to BS EN ISO 7380 -
M3 x 10 SKT BUTTON HEAD SCREW BZP (10.9)Read moreQualfast Socket Head Button Screws: ISO Metric – Bright Zinc Plated (BZP)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. For high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
Dimensions to BS EN ISO 7380 -
M3 x 10 SKT HEAD C/SUNK SCREW (10.9)Read moreSocket Head Countersunk Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to DIN7991 -
M3 x 10 SKT HEAD C/SUNK SCREW BZP (10.9)Read moreQualfast Socket Head Countersunk Screws: ISO Metric – Bright Zinc Plated (BZP)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to DIN7991 -
M3 x 10 SKT HEAD CAP SCREW (12.9)Read moreSocket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M3 x 10 SKT HEAD CAP SCREW (12.9) BZPRead moreSocket Head Cap Screws: ISO Metric – Bright Zinc Plated (BZP)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M3 x 10 SKT SET SCREW KNURLED (14.9)Read moreQualfast Socket Set Screws: ISO Metric, Standard (Self-Colour) – Knurled Cup
Knurled Cup
High tensile alloy steel. Grade 14.9. DIN 916
For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency. -
M3 x 12 A2 ST/ST SKT BUTTON HEAD SCREWRead more
Qualfast Socket Head Button Screws: ISO Metric – A2 Stainless Steel
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. For high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
Dimensions to BS EN ISO 7380