Archives: Products
Showing 18881–18896 of 23773 results
-
M16x2.0 HSS-COBALT BLACKRING SP/PT DIN 376 TAPRead moreHSS-E ‘Black Ring’ Taps
The unique general purpose properties of these taps guarantee high productivity by reducing the amount of time spent changing taps for different materials and at the same time reduces the number of taps required by the machine shop.
Swiss+Tech âBlack Ringâ machine taps with their wide range of applications are the result of years of experience in metal cutting. Responsible for our developments were the following demands from our main customers:
⢠Increase of a tapâs versatility.
⢠Reducing the confusing type variety.
⢠Reducing the storage costs for the tools.
⢠Reducing the tool changing times.
For general tapping applications. For production tapping of specific materials a specialist tap may be more suitable. Manufactured to DIN 371/376.The tool geometry (with up to 138 parameters) has been developed and optimised during long-term tests in co-operation with users for the different sections of structural steel, aluminum casting, machining steel, VA-steels, heat-resistant steels and tool steels. Selected hard coatings increase the range of applications. The objective of developing Swiss+Tech’s âBlack Ringâ Taps was the realisation of narrower tolerances and more efficient cutting times for the thread production.
-
M16x2.00mm CHASER DIE 20mm D/HD TYPE S20Read moreCoventry Type Chaser Dies – ISO Metric: Throat Angle S20
Cutting takes place only on the throat and the first full tooth; the remaining threads are above centre height and act as a nut, ensuring accurate pitch. Ideal for batch work or continuous production of threaded steel bar. Coventry dies are not interchangeable. An original set of new dies must always be used together. When taken from the diehead the set of dies should be retained in its box until required again.
Throat Angles
20° for general work and soft steels – supplied as standard.
33° âBâ type for cutting brass, available on request.Grinding Dies
Only two angles are ground on Coventry dies, the throat angle and the rake angle and in the particular case of Holozone dies only the throat angle is ground. All dies in a set must be ground on the throat at the same time and since they cannot be accurately ground by hand, a die grinding fixture must be used.Marking & Materials
Each die is marked with: diameter, pitch, type of die and gauge number. Non-standard or special dies are marked with an SD number which should be quoted when re-ordering. When a set of dies has been re-ground several times by grinding the throat angle, the height of the cutting edge rises above centre. This condition must be rectified by grinding the rake angle until the die height is correct according to the number shown on the die. -
M16x2.00mmx1.5D THREAD REPAIR KITRead moreKennedy Wire Thread Insert Kits
Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice versa. 1 1/2â x diameter in length. Other lengths are available on request. Each kit supplied with inserts, HSS hand tap, insertion tool and instructions.
Kits come complete with: Hand Tap, Inserting Tool and Inserts.
â Includes Punch.
* Includes Drill and Punch. -
M16x2.00mmx1.5D THREADING INSERTS (PK-10)Read moreKennedy Threading Inserts – ISO Metric Threads
Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information.
-
M18 x 100 SKT HEAD CAP SCREW (12.9)Read moreSocket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18 x 1MTR HIGH TENSILE GRADE 8.8 STUDDING BZPRead moreHigh Quality Screwed Studding – High Tensile Steel – Grade 8.8 BZP: Metric
High Tensile Steel – Grade 8.8 BZP: Metric
Colour-coded at each end of length for easy identification as shown. -
M18 x 50 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18 x 60 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18 x 70 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18 x 80 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18 x 90 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M18.0x2.50 GO & NO GO SCREW PLUG GAUGERead moreKennedy Screw Plug Gauges – Metric Coarse: Double-Ended Go & No Go
Metric Coarse: Double-Ended Go & No Go â Class 6H Tolerance
Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and Âoptimum wear life. -
M2 x 10 A2 ST/ST SKT HEAD CAP SCREWRead moreQualfast Socket Head Cap Screws: ISO Metric – A2 Stainless Steel
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
-
M2 x 10 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M2 x 12 A2 ST/ST SKT HEAD CAP SCREWRead more
Qualfast Socket Head Cap Screws: ISO Metric – A2 Stainless Steel
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
-
M2 x 12 A2 ST/ST SKT SETSCREW PLAIN CUPRead moreQualfast Socket Set Screws: ISO Metric, A2 Stainless Steel – Plain Cup
Plain Cup
High tensile alloy steel. Grade 14.9. DIN916
For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.