Archives: Products
Showing 18753–18768 of 23773 results
-
M14 x 90 SKT HEAD CAP SCREW (12.9)Read moreSocket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M14.0x2.00 GO & NO GO SCREW PLUG GAUGERead moreKennedy Screw Plug Gauges – Metric Coarse: Double-Ended Go & No Go
Metric Coarse: Double-Ended Go & No Go â Class 6H Tolerance
Made from the finest quality steel and are thoroughly hardened, stabilised and thread ground under strict quality control procedures ensuring a high quality product and Âoptimum wear life. -
M14x1.25mmx1.5D THREAD REPAIR KITRead moreKennedy Wire Thread Insert Kits
Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice versa. 1 1/2â x diameter in length. Other lengths are available on request. Each kit supplied with inserts, HSS hand tap, insertion tool and instructions.
Kits come complete with: Hand Tap, Inserting Tool and Inserts.
â Includes Punch.
* Includes Drill and Punch. -
M14x1.25mmx1.5D THREADING INSERTS (PK-10)Read moreKennedy Threading Inserts – ISO Metric Threads
Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information.
-
M14x1.50mmx1.5D THREAD REPAIR KITRead moreKennedy Wire Thread Insert Kits
Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice versa. 1 1/2â x diameter in length. Other lengths are available on request. Each kit supplied with inserts, HSS hand tap, insertion tool and instructions.
Kits come complete with: Hand Tap, Inserting Tool and Inserts.
â Includes Punch.
* Includes Drill and Punch. -
M14x1.50mmx1.5D THREADING INSERTS (PK-10)Read moreKennedy Threading Inserts – ISO Metric Threads
Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information.
-
M14x2 ORANGE SP/FL 371 HSS-PM NIT+OX TAPRead moreHSS âOrange Ringâ Taps
Spiral Flute – HSS-PM Nitride & Oxide Finish
For blind holes. Taper lead to DIN form C.
This tap has the special
chamfer lead of (3 x P).
Tapping tolerance: spiral flute to 6H.
ISO Metric Coarse Helix angle 40°. Tapping depth 2.5 x D. -
M14x2 WHITE 371 HSS-EV NIT BLIND TAPRead moreHSS âWhite Ringâ Taps
Straight Flute – HSS-EV Nitride Finish
For blind holes. Plug/bottoming lead to
DIN form C (2 x P to 3 x P).
Tapping tolerance to 6HX. -
M14x2.00mm CHASER DIE 20mm D/HD TYPE S20Read moreCoventry Type Chaser Dies – ISO Metric: Throat Angle S20
Cutting takes place only on the throat and the first full tooth; the remaining threads are above centre height and act as a nut, ensuring accurate pitch. Ideal for batch work or continuous production of threaded steel bar. Coventry dies are not interchangeable. An original set of new dies must always be used together. When taken from the diehead the set of dies should be retained in its box until required again.
Throat Angles
20° for general work and soft steels – supplied as standard.
33° âBâ type for cutting brass, available on request.Grinding Dies
Only two angles are ground on Coventry dies, the throat angle and the rake angle and in the particular case of Holozone dies only the throat angle is ground. All dies in a set must be ground on the throat at the same time and since they cannot be accurately ground by hand, a die grinding fixture must be used.Marking & Materials
Each die is marked with: diameter, pitch, type of die and gauge number. Non-standard or special dies are marked with an SD number which should be quoted when re-ordering. When a set of dies has been re-ground several times by grinding the throat angle, the height of the cutting edge rises above centre. This condition must be rectified by grinding the rake angle until the die height is correct according to the number shown on the die. -
M14x2.00mmx1.5D THREAD REPAIR KITRead moreKennedy Wire Thread Insert Kits
Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice versa. 1 1/2â x diameter in length. Other lengths are available on request. Each kit supplied with inserts, HSS hand tap, insertion tool and instructions.
Kits come complete with: Hand Tap, Inserting Tool and Inserts.
â Includes Punch.
* Includes Drill and Punch. -
M14x2.00mmx1.5D THREADING INSERTS (PK-10)Read moreKennedy Threading Inserts – ISO Metric Threads
Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information.
-
M16 x 100 A2 ST/ST SKT HEAD CAP SCREWRead moreQualfast Socket Head Cap Screws: ISO Metric – A2 Stainless Steel
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
-
M16 x 100 LOW HEAD SKT CAP SCREWRead moreQualfast Socket Head Cap Screws: Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. DIN 7984.
* Supplied Low Head
-
M16 x 100 SKT HEAD C/SUNK SCREW (10.9)Read moreSocket Head Countersunk Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to DIN7991 -
M16 x 100 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912 -
M16 x 110 SKT HEAD CAP SCREW (12.9)Read more
Socket Head Cap Screws: ISO Metric – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile
applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS EN ISO 4762 DIN 912