Archives: Products
Showing 17745–17760 of 23773 results
-
INTERIOR SECURITY MIRROR400mmRead moreAcrylic Convex Security Mirrors
Internal and external acrylic convex mirrors with fully adjustable fixing brackets. For use in all situations i.e. security, safety, traffic surveillance, warehousing, car parks, retail business, road way (exit from drive to road) etc. Each mirror comes complete with wall mounting hardware and instructions for maximum viewing.
-
INTERIOR SECURITY MIRROR600mmRead moreAcrylic Convex Security Mirrors
Internal and external acrylic convex mirrors with fully adjustable fixing brackets. For use in all situations i.e. security, safety, traffic surveillance, warehousing, car parks, retail business, road way (exit from drive to road) etc. Each mirror comes complete with wall mounting hardware and instructions for maximum viewing.
-
INTERNAL & EXTERNAL PULLER KITAdd to cartKennedy Slide Hammer Puller Set
3 Jaw Internal & External Multi-function Slide Hammer Puller Set
Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.6 Piece Set Contents: 1x T-bar. 1x hammer 1.2kg. 1x 3 jaw internal puller 15 – 30mm. 1x 3 jaw internal puller 30 – 80mm. 1x 3 jaw external puller 15 – 80mm. 1x blow moulded case.
-
INVINCIBLE YELLOW BUILDERS BUCKET 15LTRRead moreKennedy 15ltr Invincible Yellow Bucket
The Kennedy Invincible yellow bucket one of the strongest buckets available today! The bucket is designed to be durable in the toughest of environments, offering a new dimension to users of a product that genuinely will last the duration almost regardless of the punishment it receives in use. We are so confident in its strength that we offer a five-year guarantee with the product. Suitable for all industries, construction, engineering, marine and agricultural.
15ltr/3 gallon filling scale inside.
-
IS50-FM40-040 SHELL/FACEMILL ADAPTORRead moreFM – Face Mill Adaptors
From an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell mills
BT = BT-MAS 403
DN = DIN69871/A
IS = ISO/DIN 2080/
QC = ISO/DIN 2080 Quick Change -
IW500 1/2″ AIR IMPACT WRENCHRead moreKobe⢠Impact Wrench
IW500
One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 4cfm* air consumption, 16mm bolt capacity.
Noise Level: 88dBA
Sound Power: N/A dBA
Vibration: 4.2m/s
Overall length: 191mm. -
IW750 3/4″ AIR IMPACT WRENCHAdd to cartKobe⢠Impact Wrench – 3/4″
IW750
One-piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4â NPT air inlet thread for 10mm air hose, 25mm bolt capacity. 90psi air pressure,
7.5cfm* air consumption. 500ft/lbs torque.
Noise Level: 83dBA
Sound Power: N/A dBA
Vibration: 0.449m/s
Overall length: 245mm.*Based on a 15 second cycle per minute average use.
-
IWS500 1/2″ IMPACT WRENCH KITRead moreKobe⢠Impact Wrench Kit – 1/2″
IWS500
Kit supplied complete in robust blow-moulded case.
Includes: 1/2â impact wrench IW500. 10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm. Threaded tailpiece, in-line mini-oiler and oil bottle. One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 4cfm* air consumption, 16mm bolt capacity.
Noise Level: 93dBA
Sound Power: N/A dBA
Vibration: 1.21m/s
Overall length: 191mm.*Based on a 15 second cycle per minute average use.
-
JACK HANDLE ASSEMBLY FORKEN5036420K/6380K TROLLEYRead moreKennedy Handle Assembly for Heavy Duty Trolley Jacks
To suit the Kennedy Heavy Duty Trolley Jack (KEN-503-6420K)
-
JAWS TO SUIT 10″ WATER PUMP PLIERS (PR)Read moreKennedy Spring-Loaded Soft Touch Slip Joint Water Pump Plier
Manufactured from hardened and tempered chrome vanadium steel with corrosion-resistant chemically blacked finish. Vinyl grip for improved comfort and control. Replaceable soft grip plastic inserts allow delicate or finished components to be gripped without damage. Eight position groove with spring-loaded rapid jaw adjustment.
Overall length: 250mm.
Capacity: 40mm. -
JAWS TO SUIT 6.1/2″ ENGINEERS PLIERS (PR)Read moreKennedy Soft Touch Engineers Pliers – Slip Joint
Hardened steel body with replaceable soft nylon jaws and bonded vinyl-coated handle. For use on delicate or finished components which normal steel jaw pliers would mark or damage. Dual position joint allows use across a wide range of diameters. With serrated parallel jaws for gripping flat workpieces and curved jaw for gripping nuts, pipes etc.
-
JERSEY LINED GREEN PVC TEXTURED GLOVES SIZE 10Read moreChemical Resistant PVC-Coated Gloves
Tough flexible PVC coated gloves with a textured finish for extra grip. Open cuffs with jersey lining.
-
JIGSAW BLADES (EQV. TO B&D A2224) PKT-5Read moreJigsaw Blades
âUâ Type Suitable for Black & Decker and Hitachi DIY. HSS – Heavy-Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.
-
JIGSAW BLADES (EQV. TO B&D A5033) PKT-5Read moreJigsaw Blades
âUâ Type Suitable for Black & Decker and Hitachi DIY. HSS – Medium-Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.
-
JIGSAW BLADES (EQV. TO BOSCH T101A) PKT-5Read moreJigsaw Blades
HSS – Heavy Duty (Pack 5
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made.‘T’ Type Shank
‘T’ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki. -
JIGSAW BLADES (EQV. TO BOSCH T101B) PKT-5Read moreJigsaw Blades
HCS – Medium Duty (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.âTâ Type Shank
âTâ Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo and Osaki.