Archives: Products
Showing 17729–17744 of 23773 results
-
INDUSTRIAL WIRE BRUSH SET (6-PCE)Read moreIndustrial Wire Wheel Sets
6 Piece Set
Contents (1 off each):
Flat end de-carbonising brushes 12 x 20, 17 x 22
and 24 x 25. Pointed end de-carbonising brushes 12 x 20, 17 x 22 and 24 x 25. -
INDUSTRIAL WIRE BRUSH SET (8-PCE)Read moreIndustrial Wire Wheel Sets
8 Piece Set
Contents (1 off each):
Shaft mounted circular brushes 30 x 12, 50 x 20 and 80 x 20.
Flat end de-carbonising brushes 12 x 20 and 24 x 25.
Pointed end de-carbonising brushes 12 x 20 and
24 x 25. Shaft mounted cup brush 50 x 50. -
INFRARED THERMOMETERRead moreEdison Infrared Laser Thermometer with Laser Targetting
IRT537
A high resolution infrared laser thermometer suitable for a wide range of industrial applications, HVAC and automotive diagnostics. The laser targeting enables accurate readings by guiding the user to the optimum measuring distance. Ideally suited for work in confined spaces and where accuracy is required such as on circuit boards, air-con units or in engine compartments. Simply aim at the target object, pull the trigger mechanism and read the current surface temperature from the LCD display. If necessary the laser can be activated via the laser button for more accurate targetting.
Temperature is displayed on back-lit LCD display and features hold function for ease of use.
Measurement range: -20C to 537C.
Accuracy: -20C to 50C /- 2.5C 51C to 537C /-(Reading x 1% 1C).
D/S ratio: 12:1.
Emissivity: 0.95.
Celsius/Fahrenheit display selection.
Back light display.
Power source: 9V battery.
Average/maximum/minimum/maximum-minimum mode selection.
Complies with EN61326:1997/A1:1998/ A2:2001/A3:2003.
Dimensions (L x W x H): 162 x 56 x 190mm.
Nett weight: 270g. -
INJECTION PUMP PULLER FOR ROVER/LAND ROVERRead moreKennedy Diesel Injection Pump Puller
For the removal of diesel injection pumps from the following engines: DPP010, DPP020, DPP030.
-
INSPECTION MIRROR 100mmx100mmRead moreKennedy Inspection Mirror
Sheet glass mirror recessed into lightweight aluminium housing. Gives clear visibility in concealed areas. Size: 100 x 100mm.
-
INSTANT NAILS (SOLVENT FREE) 310mlRead moreInstant Nails
A high strength gap filling solvent free adhesive that produces a quick grab and replaces mechanical fixings in a multitude of home improvement applications. Dries white and can be painted over when dry.
-
INSULATED INTERCHANGEABLE SCREWDRIVER SET 10-PCERead moreInsulated Interchangeable Screwdriver Set
Ergonomic insulated full size handle, swivel cap and eight interchangeable drivers supplied in a compact protective pouch with belt loop. 2-in-1 design, use the detachable swivel cap for fast (low torque) driving, or use the full size detachable ergonomic handle for higher torque fastening. Safe up to 1000V AC/1500V DC.
10 Piece Set Contents (mm):
Parallel: 0.4 x 2.5 x 100mm, 0.5 x 3.0 x 100mm, 0.8 x 4.0 x 100mm, 1.0 x 5.5 x 100mm and 1.2 x 6.5 x 100mm.
Cross Point: No.0 x 100mm, No.1 x 100mm and No.2 x 100mm. -
INSULATED JUNIOR HACKSAW 150mmRead moreInsulated Junior Hacksaw
Quality tested and insulated to 1000V AC and 1500V DC for live line working. All insulation is moulded in one piece, thus avoiding possible air gaps or other potential hazards. Uses conventional junior hacksaw blades. IEC: 60900:2004.
-
INSULATED PROFESSIONAL HACKSAW FRAME 400mmRead moreInsulated Hacksaw
Die cast frame with âDâ style handle for user comfort and control. Wing nut blade tensioning. Supplied complete with 300mm 24tpi blade. Fully insulated to conform to VDE 0680/201, IEC 900 and BS EN 60900 standards for safe electrical applications up to 1000V.
-
INSULATED REVERSIBLE RATCHET 1/2″ SQ/DRRead moreInsulated Sockets & Accessories
All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 and IEC 900 standards. All 1/2â square drive.
Insulated Reversible Ratchet Handle.
125 & 250mm Insulated Extension Bars.
200mm Insulated T-Handle.
Insulated Single Hexagon Sockets. -
INSULATED SCREWDRIVER & PLIER SET 10-PCERead more1000V Dual Grip Screwdriver & Plier Set
10 Piece Set
Fully insulated professional high grip dual material handles that are VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole. Pliers have chrome vanadium steel double polished head and joint heads.
Contents:
Screwdrivers:
Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm.
Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm.
Pliers:
⢠6.3/8″ Pro-Torq snipe nose pliers,
⢠6.1/4″ Pro-Torq grip nipper pliers,
⢠6.1/2″ Pro-Torq engineering combination pliers. -
INSULATED TWEEZERS BENT 145mmRead moreInsulated Tweezers
Straight/bent pattern tweezers with serrated gripping surfaces, quality tested and insulated to 1000V AC. Conforms to EN 60900 standards.
Overall length: 145mm. Exposed blade length: 15mm. -
INSULATED TWEEZERS STRAIGHT 145mmRead moreInsulated Tweezers
Straight/bent pattern tweezers with serrated gripping surfaces, quality tested and insulated to 1000V AC. Conforms to EN 60900 standards.
Overall length: 145mm. Exposed blade length: 15mm. -
INSULATED VDE SCREWDRIVER SET 7-PCERead moreElectricianâs VDE Square Section Handle Screwdriver Set – 7 Pieces
Volt-testedâ to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Set Contents:
Supplied in clear plastic wallet.
Parallel: 2.5 x 85, 4.0 x 100, 5.5 x 125, 6.5 x 150mm.
Crosspoint: No.0 x 75, No.1 x 100, No.2 x 100mm. -
INTERCHANGEABLE STAMP HOLDER 3.0mm WITH STARLETTRead moreKennedy Individual Fount Holder
The knurled grip fount holder has an impact resistant plastic hand shield to redirect the force of miss-hits safely away from your hand preventing injury.
-
INTERCHANGEABLE STAMP SET 3.0mm (100PC)Read moreKennedy Fount Set
Set
Precision manufactured carbon steel alphabetical and numeric-marking stamps with nickel-plated finish. For producing between eight and ten clean uniform impressions in one impact, suitable for all batch and general-purpose marking. Each set contents
tweezers to allow easy handling of the individual fount blocks. The knurled grip fount holder has an impact resistant plastic hand shield to redirect the force of miss-hits safely away from your hand preventing injury. Hexagon wrench for operating the fount retaining screw and 100 characters and spaces according to the most common use. See diagram for exact character content. Supplied complete in a foam- lined plastic carry case.