Archives: Products

View cart “HYDRAULIC BEARING SEPARATOR SET 105-150mm” has been added to your cart.

Showing 17697–17712 of 23773 results

HOSE/COUPLER SINGLE SPEED HAND PUMP 1/4″-1/4″ NPT

Kennedy Spare Parts for Hydraulic Hand Pumps

To suit Kennedy Hydraulic Hand Pumps

Read more
HOSE/COUPLER TWIN SPEED HAND PUMP 1/4″-3/8″ NPT

Kennedy Spare Parts for Hydraulic Hand Pumps

To suit Kennedy Hydraulic Hand Pumps

Read more
HP2090K HEAVY DUTY HAMMER & CHISEL KIT

Kobeâ¢ Hammer & Chisel Kit

HP2090K
Supplied with flat chisel, spot weld breaker, taper punch, rivet cutter and sheet metal cutter. Hard hitting long stroke. Accepts all standard 0.401â shank tools. 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
Noise Level: 105dBA
Sound Power: 118dBA
Vibration: 11.5m/s
Stroke length: 90mm.
Overall length: 230mm.

*Based on a 15 second cycle per minute average use.

Read more
HP2190 HEAVY DUTY PISTOLGRIP AIR HAMMER

Kobeâ¢ Heavy-Duty Pistol Grip Air Hammer

HP2190
For a wide range of workshop and automotive uses. Supplied with retainer spring. Accepts all standard 0.401â shank tools, 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
Noise Level: 109dBA
Sound Power: 119dBA
Vibration: 11.2m/s
Stroke length: 90mm.
Overall length: 225mm.

*Based on a 15 second cycle per minute average use.

Read more
HP4540 PISTOL GRIP AIR HAMMER

Kobeâ¢ Pistol Grip Air Hammer

HP4540
Suitable for use with cutters, punches, spot weld breakers and flat chisels. Supplied with retainer spring. Accepts all standard 0.401â shank tools, 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
Noise Level: 112dBA
Sound Power: 121dBA
Vibration: 15.5m/s
Stroke length: 40mm.
Overall length: 145mm.

*Based on a 15 second cycle per minute average use.

Read more
HP5040K HAMMER & CHISEL KIT

Kobeâ¢ Hammer & Chisel Kit

HP5040K
Supplied with flat chisel, spot weld breaker, taper punch and rivet cutter. Variable power regulator. Accepts all standard 0.401â shank tools. 1/4â NPT air inlet thread for 10mm air hose, 90psi air pressure, 4cfm* air consumption.
Noise Level: 112dBA
Sound Power: 119dBA
Vibration: 14.8m/s
Stroke length: 40mm.
Overall length: 135mm.

*Based on a 15 second cycle per minute average use.

Read more
HPDE RESIN HIGH CAPACITYCASE 470x390x347mm

Kennedy High Impact Resistant Tool Case

Manufactured from composite aluminium and rubber resin which is normally used in the automotive industry. Chromed steel hinges with lid support mechanism, two chromed
steel locks with keys, a heavy-duty plastic handle and four rubber feet. Inside are two secured hinged tool boards, each with 31 elasticated tool loops, an expandable document compartment, two small organisers and a customisable storage compartment with repositional dividers.

Read more
HSS CUTTING WHEEL FOR KEN588-5700/5720K CUTTERS

Kennedy Mini Pipe Cutter

Compact and robust construction ideal for use in confined spaces. Grooved rollers allow close-to-flare cuts. Large feed screw for accurate cutting of aluminium, brass, copper and steel tubing.
Length: 66mm.

Read more
HTA500 FOOD SAFE HIGH-TECH GREASE 500ml

FDA Compliant
NSF H1 Registered
Synthetic Translucent
Food Safe
PTFE grease
Non-Toxic
Sets to No. 2 rated grease
Anti-corrosive
Safe for use at temperatures
from -40 to 340C

Food safe synthetic PTFE grease is a fully synthetic translucent non melting grease that allows fluid to penetrate into machine parts before setting to a No.2 rated grease.
It protects and lubricates with a non-toxic anti corrosive shield for use on sliding and rolling element bearing surfaces, metal, wood and plastics.
Manufactured from non-toxic lubricant ingredients listed by the FDA and is NSF H1 registered. Totally salt or fresh water resistant to be used inside and out on a range of machinery in temperatures ranging from -40C to 340C.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.

Read more
HYDRAULIC BEARING SEPARATOR SET 105-150mm

Kennedy Hydraulic Separator Sets

HS7 105 – 150mm
HS11 75 – 105mm
For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.

Both sets contain:
1x hydraulic ram.
1x separator.
2x 200mm main rods.
2x 230mm extension rods.
1x beam.
1x ram nut.

HS7 (only) also contains
1x 80mm push plate.
1x 50mm ram extension.
1 x 100mm ram extension.

Add to cart
HYDRAULIC BEARING SEPARATOR SET 75-105mm

Kennedy Hydraulic Separator Sets

HS7 105 – 150mm
HS11 75 – 105mm
For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case.

Both sets contain:
1x hydraulic ram.
1x separator.
2x 200mm main rods.
2x 230mm extension rods.
1x beam.
1x ram nut.

HS7 (only) also contains
1x 80mm push plate.
1x 50mm ram extension.
1 x 100mm ram extension.

Read more
HYDRAULIC NUT SPLITTER SET (8-PCE)

Kennedy Hydraulic Nut Splitter Set

The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. The splitter bodies are manufactured from
carbon steel.
8 Piece Set contents:
1x hydraulic ram.
1x splitter body 3/8â diameter capacity.
1x splitter body 1/2â diameter capacity.
1x splitter body 5/8â diameter capacity.
1x splitter body 3/4â diameter capacity.
1x splitter body 1â diameter capacity.
1x threaded attachment sleeve.
1x oil bottle.

Add to cart
HYDRAULIC PULLER SET (18-PCE)

Kennedy 6 Way Hydraulic Puller Set

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 – 250mm and reach of 0 – 250mm. Can be used as a two or three legged puller with the same head.

Contents: 1x combination head. 1x hydraulic ram. 3x three position puller legs. 6x leg connectors. 6x screw nuts, bolts and washers. 1x 50mm extension rod. 1x centre adaptor. 1x blow moulded storage case.

Add to cart
HYDRAULIC PULLER SET (25-PCE)

Kennedy Hydraulic Puller/ Separator Set

10 ton capacity hydraulic ram with tommy bar. Suitable for agricultural machines, garage and industrial use.
Contents:
1x hydraulic ram (KEN- 503-7200K).
3x 4â, 6â and 8â puller legs.
1x twin head.
1x triple head.
1x 50mm ram extension.
1x 100mm ram extension.
2x 200mm main rods.
2x 230mm extension rods.
1x 75 – 105mm separator.
1x bolt.
1x ram ring. 1x ram nut.
Blow moulded storage case.

Add to cart
IGNITION SPANNER SET 11PC

Kennedy 11 Piece Ignition Wrench Set

Contents: 8 open end spanners 4 – 7.5mm x 0.5mm increments, screwdriver, file, 0.40mm gap gauge.

Read more
IMMERSION HEATERS BOX SPANNER

Kennedy Immersion Box Spanner

This heavy duty box spanner complete with tommy bar will reach recessed elements on most hot water tanks.

Read more