Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

REVOLVING CENTRE 5MT STANDARD DUTY

Kennedy Standard Duty Revolving Centres

Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.

Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm.

Out of stock

SKU : KEN4881050K

Kennedy Standard Duty Revolving Centres

Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Mounting Tapers are accurate to DIN228 Form A, Tolerance Class AT5.

Maximum runout:
No.1 to 4 taper: 0.005mm.
No.5 to 6 taper: 0.010mm.

Specification :
Axial Load (rpm) @100 (kgf) : 570
Axial Load (rpm) @3000 (kgf) : 230
Brand : Kennedy Industrial
eCl@ss Code : 23049190
Max rpm : 4000
Morse Taper : No.5
Overall Depth : 109
Overall Length : 283
Overall Weight : 3
Overall Width : 109
Radial Load (rpm) @100 (kgf) : 800
Radial Load (rpm) @max (kgf) : 280
UNSPSC Code : 23153013
Weight each : 3.00kg

Weight 1 kg
SKU: KEN4881050K Categories: , , ,

Related products

  • 1/2″x3/8″x16TPI T-SLOT MACHINE CLAMP SET

    Atlas T-Slot Steel Clamping Sets – Inch

    58 Pieces Inch Sets (Quantity of each component part given in brackets)
    Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

    Read more
  • V90-FA ‘U’ BAR ADJUSTABLE VERTICAL CLAMP

    Atlas Vertical Industrial Toggle Clamp – ‘U’ Bar (Adjustable) Type with Flanged Base

    ‘U’ Bar (Adjustable) Type with Flanged Base
    Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.

    ** Model AV90-FA has Side Flange – All other FA models listed have Flat Flanges

    Read more
  • 18mmxM14 T-SLOT MACHINE CLAMP SET

    Atlas T-Slot Steel Clamping Sets – Metric

    58 Pieces Metric Sets (Quantity of each component part given in brackets)
    Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

    Read more
  • SC146428 64x28x12mm M14 STEP CLAMP

    Atlas Step Clamp

    Material: Medium Carbon Steel.
    Hardness: HRC 32 – 38.
    Surface Finish: Black Oxide.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping