JIGSAW BLADES (EQV. TO BOSCH T118AF) PKT-5

Jigsaw Blades Continued

Bi-Metal – High Performance (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Out of stock

SKU : KEN2401150K

Jigsaw Blades Continued

Bi-Metal – High Performance (Pack 5)
Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Specification :
Brand : Kennedy Industrial
Capacity (mm) Alum. : 1.5-4.0
Capacity (mm) Plastics : 8.0
Capacity (mm) Steel : 1.5-4.0
Capacity (mm) Wood : –
eCl@ss Code : 21011603
Effective Length : 50
Equiv. : T118AF
Features : Wavy Set Teeth
Overall Weight : 0.028
Supplier Part No. : 3 14 12/5
Tooth Pitch : 1.2
UNSPSC Code : 27112802

Weight 1 kg
SKU: KEN2401150K Categories: , ,
0
    0
    Your Cart
    Your cart is emptyReturn to Shop