Relaunch Promotion
Product Showcase
HEAVY DUTY CYLINDER HONE 3-LEG
Heavy-Duty Cylinder Hone
For honing of brake cylinders and piston bores with capacities between 51 – 178mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant.
Overall length: 290mm.
Out of stock
SKU : KEN5032920K
Heavy-Duty Cylinder Hone
For honing of brake cylinders and piston bores with capacities between 51 – 178mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant.
Overall length: 290mm.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 21049090
Overall Depth : 55
Overall Length : 354
Overall Weight : 0.38
Overall Width : 88
Supplier Part No. : 0100
Type : 3 Leg
UNSPSC Code : 27140000
Weight each : 380g
| Weight | 1 kg |
|---|
Related products
-
PETROL ENGINE COMPRESSION TESTERRead moreKennedy Compression Tester
Suitable for all types of spark plugs. Finds faults in piston rings, valves, head gaskets and cylinder bores. Suitable for use on most petrol engine vehicles and motorcycles. Can be used on crankshaft seals in two-stroke engines. 195mm flexible hose. For use on 14mm and 18mm threads. Large easy to read scale 0-21bar/0-300psi. Air release valve to allow rapid re-testing.
-
RADIO RELEASE MASTER SET 46-PCERead moreKennedy Radio Release Master Set
RRM046
Radio release master set contains a comprehensive set of high quality tools suitable for authorised release and removal of in-car entertainment units. These professional tools, have a chromed finish and are manufactured from heavy-gauge materials to ensure these tools will not distort in general use. Supplied in foam lined aluminium carry-case. Compatible with the following makes of in car entertainment units: Audi, Becker, Becker from 2002, Blaupunkt, Blaupunkt from 2002, BMW, Clarion – New, Clarion – Old, Fiat Brava, Bravo & Marea, Grundig, JVC, Kenwood II to 2001, Kenwood III from 2002, Mercedes Benz, Opel, Opel-Inbus, Panasonic, Panasonic from 2006, Pioneer, Porsche, Skoda from 2002, Sony I to 2001, Sony II from 2002, VW. -
SUB FRAME BUSH REMOVAL TOOL FORD MONDEORead moreKennedy Mondeo Sub-Frame Bush Installation and Removal Tool
For the Removal/Installation of rear sub-frame bushes in the Ford Mondeo. Can be used in situ, no need to remove sub-frame from vehicle.
Applications: Ford Mondeo 2001, 10/2000 onwards -
BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTORRead moreKennedy Ball Joint Servicing Kit
Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle
Contents:
1 x C-frame press and Forcing Screw.
3 x Receiver tubes: 2-3/4″ x 3″ / 2-1/4″ x 2-1/2″ / 1-3/4″ x 2″
Installation/Removal Adaptor & Cups
4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep).