Category

Call To +62 31 3330-0020

Category

Blog

Relaunch Promotion

1LTR UNDERSEAL/WAX INJECTOR GUN

Kennedy Wax Injector Gun

WIG100
Pneumatic tool for spraying and injecting wax underseal into areas that are difficult to access, such as door cavities, inside box section chassis and around wheel arches. Has a 1 litre container with a ¼” NPT connection, operates from 90 – 145psi (6 – 10bar) air pressure with an air consumption rate of 380ltr/min and a vacuum of (maximum) 550mm HG. Supplied with 900mm spray hose and hanging hook.

Out of stock

SKU : KEN5031880K

Kennedy Wax Injector Gun

WIG100
Pneumatic tool for spraying and injecting wax underseal into areas that are difficult to access, such as door cavities, inside box section chassis and around wheel arches. Has a 1 litre container with a ¼” NPT connection, operates from 90 – 145psi (6 – 10bar) air pressure with an air consumption rate of 380ltr/min and a vacuum of (maximum) 550mm HG. Supplied with 900mm spray hose and hanging hook.

Specification :
Brand : Kennedy Industrial
Dimensions : 1 Litre
eCl@ss Code : 21049090
Overall Depth : 210
Overall Length : 280
Overall Weight : 0.62
Overall Width : 130
Supplier Part No. : UIG100
UNSPSC Code : 27141000

Weight 1 kg
SKU: KEN5031880K Categories: , , ,

Related products

  • SPOT WELD REMOVER

    Kennedy Spot Weld Remover

    Suitable for cutting holes in steel metal, steel, plastic and brass. The hardened steel cutter is reversible increasing tool life. adjusting the spring loaded centre point, screw accurately controls the depth of cut. Allowing the top to be removed whilst leaving the lower panel in place.

    Read more
  • WINDSCREEN WIPER ARM REMOVAL TOOL

    Kennedy Windscreen Wiper Arm Removal Tool

    Windscreen wiper arm removal tool for removing stuck and stubborn taper fitting wiper arms.
    Maximum opening: 27mm.
    Collar size: 15mm.

    Read more
  • BRAKE FLUID TESTER AAA 1.5V

    Brake Fluid Tester (Battery Operated)

    This ingenious tool is invaluable in the garage workshop for testing the quality of brake fluid. Testing for moisture content in the fluid by resistance to electric current. You get instant results from the built-in LED indicator light system. (Runs on 1 x 1.5V AAA battery).

    Read more
  • BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTOR

    Kennedy Ball Joint Servicing Kit

    Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
    Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.

    This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle

    Contents:
    1 x C-frame press and Forcing Screw.
    3 x Receiver tubes: 2-3/4″ x 3″ / 2-1/4″ x 2-1/2″ / 1-3/4″ x 2″
    Installation/Removal Adaptor & Cups
    4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep).

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping