Category

Call To +62 31 3330-0020

Category

Archives: Products

Showing 15937–15952 of 23773 results

  • B16 x 3MT DRILL CHUCK ARBOR

    KD Type – Morse Taper Shank to Din Taper Arbors

    KD Type – Morse Taper Shank to Din Taper Arbors
    Precision machined, fully hardened and ground to give maximum surface contact.
    Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238.

    Read more
  • B16 x 4MT DRILL CHUCK ARBOR

    KD Type – Morse Taper Shank to Din Taper Arbors

    KD Type – Morse Taper Shank to Din Taper Arbors
    Precision machined, fully hardened and ground to give maximum surface contact.
    Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238.

    Read more
  • B2-1/2-6 6″ BENCH GRINDER 1/2 H/P

    Kobe Bench Grinders

    Industrial quality, for the professional user. Adjustable tool rest and spark deflector. Maintenance-free motor. Eye shield. Smooth and quiet operation. CE approved.
    Voltage: 240V.
    Speed: 2,800rpm.
    Max. grinding wheel width: 25mm.
    Spindle diameter: 15mm.

    Read more
  • B2-1/2-8 8″ BENCH GRINDER

    Kobe Bench Grinder – 200mm

    200mm
    Industrial quality, for the professional user. Adjustable tool rest and spark deflector. Maintenance-free motor. Eye shield. Smooth and quiet operation. CE approved.
    Voltage: 240V. Speed: 2,800rpm. Max. grinding wheel width: 25mm. Spindle diameter: 15mm.

    Picture descriptions:
    Supplied with 2 York Grinding Wheels: A36 & A60

    Read more
  • B20 LIGHT DUTY HAND DEBURRING BLADE
    Rp58.000

    SwissBurr Modular Deburring Tools – Light Duty Blades

    SwissBurr hand deburring tools are a fast effective and efficient way of deburring holes, slots and edges. Swiss Burr is a totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS or carbide blades, countersinks and scrapers are available to suit your specific application. Swiss Burr blades are also interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.

    Light Duty Blades
    B10 – HSS Blade for straight and hole edge deburring.
    B11 – B10 geometry with thin nose for small diameter holes down to 2mm.
    B20 – HSS Blade for straight and hole edge deburring. Blade design allows clockwise and anti-clockwise movement.
    B30 – HSS Blade for Cross-Hole and both edges. Blade will simultaneously deburr the inside and outside of the hole. For use on holes up to 4mm thick.
    B60 – HSS Blade for deburring back edges on holes, will remove burrs from the back edge of oles up to 20mm thick.

    Add to cart
  • B20 TiN LIGHT DUTY HAND DEBURRING BLADE
    Rp81.000

    SwissBurr Modular Deburring Tools – Light Duty Blades

    SwissBurr hand deburring tools are a fast effective and efficient way of deburring holes, slots and edges. Swiss Burr is a totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS or carbide blades, countersinks and scrapers are available to suit your specific application. Swiss Burr blades are also interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.

    Light Duty Blades
    B10 – HSS Blade for straight and hole edge deburring.
    B11 – B10 geometry with thin nose for small diameter holes down to 2mm.
    B20 – HSS Blade for straight and hole edge deburring. Blade design allows clockwise and anti-clockwise movement.
    B30 – HSS Blade for Cross-Hole and both edges. Blade will simultaneously deburr the inside and outside of the hole. For use on holes up to 4mm thick.
    B60 – HSS Blade for deburring back edges on holes, will remove burrs from the back edge of oles up to 20mm thick.

    Read more
  • B22 x 4MT DRILL CHUCK ARBOR

    KD Type – Morse Taper Shank to Din Taper Arbors

    KD Type – Morse Taper Shank to Din Taper Arbors
    Precision machined, fully hardened and ground to give maximum surface contact.
    Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238.

    Read more
  • B2834 3/8″ REV.DRILL IND. KEYED CHUCK

    Kobe™ Reversible Pistol Grip Drill, 10mm

    B2834
    Use for drilling and screwdriving. Two speed trigger (slow speed when pushed halfway). Directional lever accessible from both sides for left/right handed use. 10mm (3/8″) chuck included. Planetary gears for longer life and smoother running. Ergonomic comfortable grip.
    Chuck size: 3/8″ (10mm).
    Free speed: 1,800rpm.
    Recommended air pressure: 6.2bar (90psi).
    Air consumption: 4cfm* (113ltr/min).
    Air inlet thread: 1/4″ NPT.
    Spindle thread: 3/8″ – 24.
    Minimum air hose size (ID): 3/8″ (10mm).
    Noise level†: 85dBA.
    Sound power level†: 96dBA.
    Vibration level #: 0.4m/s2.
    Overall length: 185mm.
    †Per en iso 15744:2002.
    #Per en 28927-5.

    *Based on a 15 second cycle per minute average use.

    Add to cart
  • B2842 1/2″ REV.DRILL IND. KEYED CHUCK

    Kobe™ Reversible Pistol Grip Drill, 13mm

    B2842
    Use for drilling and screwdriving. Two speed trigger (slow speed when pushed halfway). Directional lever accessible from both sides for left/right handed use. 13mm (1/2”) chuck and detachable side handle included. Planetary gears for longer life and smoother running. Ergonomic comfortable grip.
    Chuck size: 1/2” (13mm). Free speed: 800rpm.
    Recommended air pressure: 6.2bar (90psi).
    Air consumption: 4cfm* (113ltr/min).
    Air inlet thread: 1/4” NPT.
    Spindle thread: 3/8” – 24.
    Minimum air hose size (ID): 3/8” (10mm).
    Noise level†: 86dBA.
    Sound power level†: 93dBA.
    Vibration level #: 0.4m/s2.
    Overall length: 218mm.
    †Per en iso 15744:2002.
    #Per en 28927-5.

    *Based on a 15 second cycle per minute average use.

    Add to cart
  • B30 LIGHT DUTY HAND DEBURRING BLADE
    Rp50.000

    SwissBurr Modular Deburring Tools – Light Duty Blades

    SwissBurr hand deburring tools are a fast effective and efficient way of deburring holes, slots and edges. Swiss Burr is a totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS or carbide blades, countersinks and scrapers are available to suit your specific application. Swiss Burr blades are also interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.

    Light Duty Blades
    B10 – HSS Blade for straight and hole edge deburring.
    B11 – B10 geometry with thin nose for small diameter holes down to 2mm.
    B20 – HSS Blade for straight and hole edge deburring. Blade design allows clockwise and anti-clockwise movement.
    B30 – HSS Blade for Cross-Hole and both edges. Blade will simultaneously deburr the inside and outside of the hole. For use on holes up to 4mm thick.
    B60 – HSS Blade for deburring back edges on holes, will remove burrs from the back edge of oles up to 20mm thick.

    Read more
  • B3144 1/4″ (6mm) 90DEG ANGLE DIE GRINDER

    Kobe™ 90° Angle Die Grinder

    B3144
    Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
    Collet size: 1/4″ (6mm), 1/8″ (3mm).
    Free speed: 20,000rpm.
    Air pressure: 6.2bar (90psi).
    Air consumption: 4cfm* (113ltr/min).
    Air inlet thread: 1/4″ NPT.
    Minimum air hose size (ID): 10mm (3/8″).
    Overall length: 165mm.
    Noise Level: 90dBA
    Sound Power: 97dBA
    Vibration: 1.24m/s

    *Based on a 15 second cycle per minute average use.

    Add to cart
  • B3244 1/4″ (6mm) 115 DEGANGLE DIE GRINDER

    Kobe™ 115° Angle Die Grinder

    B3244
    Reversible hardened steel 1/4” collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.
    Collet size: 1/4” (6mm), 1/8” (3mm).
    Free speed: 20,000rpm.
    Recommended air pressure: 6.2bar (90psi).
    Air consumption: 4cfm* (113ltr/min).
    Air inlet thread: 1/4” NPT.
    Minimum air hose size (ID): 10mm (3/8”).
    Overall length: 200mm.
    Noise Level: 90dBA
    Sound Power: 97dBA
    Vibration: 1.24m/s

    *Based on a 15 second cycle per minute average use.

    Read more
  • B3456 1/4″ (6mm) STRAIGHT DIE GRINDER

    Kobe™ Straight Continuous Use Die Grinder

    B3456
    Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4″ collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

    Specifications:
    Drive size: 1/4″ (6mm), 1/8″ (3mm).
    Free speed: 25,000rpm.
    Air pressure: 6.2Bar (90PSI).
    Air consumption: 4CFM* (113ltr/min).
    Air inlet thread: 1/4″ NPT.
    Minimum air hose size (ID): 10mm (3/8″).
    Noise level: 91dBA.
    Sound power level: 98dBA.
    Vibration level#: 4.53m/s2.
    Overall length: 160mm.
    Weight: 0.6kg.
    ? Per Pneurop Standards EN 12366.
    # Per EN 28927-1.

    *Based on a 15 second cycle per minute average use

    Add to cart
  • B3555 1/4″ (6mm) EXT. STRAIGHT DIE GRINDER

    Kobe™ Extended Straight Die Grinder

    B3555
    Use for grinding, polishing, buffing and deburring. The extra length allows you to reach more confined areas. Reversible hardened steel 1/4″ collet. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

    Specifications:
    Model number: B3555
    Collet size: 1/4″ (6mm), 1/8″ (3mm).
    Free speed: 25,000rpm.
    Recommended air pressure: 6.2Bar (90PSI).
    Air consumption: 4CFM* (113ltr/min).
    Air inlet thread: 1/4″ NPT.
    Minimum air hose size (ID): 10mm (3/8″).
    Noise level: 91dBA.
    Sound power level: 98dBA.
    Vibration level#: 4.53m/s2.
    Overall length: 260mm.
    Net weight: 0.68kg.
    ?Per Pneurop Standard Per EN 12366.
    #Per EN 28927-1.

    *Based on a 15 second cycle per minute average use.

    Add to cart
  • B41 MOUNTED POINT

    Mounted Points and Wheels

    ‘B’ Shape – Shank Diameter 3mm
    Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

    Read more
  • B42 MOUNTED POINT

    Mounted Points and Wheels

    ‘B’ Shape – Shank Diameter 3mm
    Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

    Read more
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping