Archives: Products
Showing 15761–15776 of 23773 results
-
ACS102 1/4″ BSPT MALE SCHRADER COUPLINGRead morePCL Genuine âSchraderâ Couplings
High flow, quick release couplings with locking facility to prevent accidental disconnection. Swivel facility eliminates hose kinking. Free air flow rate at 7bar/100psi: 50cfm (1400ltr/min).
-
ACS103 3/8″ BSPT MALE SCHRADER COUPLINGRead morePCL Genuine âSchraderâ Couplings
High flow, quick release couplings with locking facility to prevent accidental disconnection. Swivel facility eliminates hose kinking. Free air flow rate at 7bar/100psi: 50cfm (1400ltr/min).
-
ACS201 1/2″ BSPT FEMALE SCHRADER H/D COUPLINGRead morePCL âSchraderâ Heavy-Duty Couplings
Free air flow rate at 7bar/100psi: 110cfm (3080ltr/min).
-
ADJ HOOK WRENCH FOR ER8/ER40 COLLET NUTRp926.000Add to cartER Industrial Hook Wrench
For ER8/ER40 collet nuts. Adjustable size, drop forged steel. Single hand adjustment. One spanner will cover 35-105 collet nuts. To suit collets: ER 8, 16, 25, 32 & 40. Metric sizes: 35, 50, 60, 70, 80, 90 & 105mm.
-
ADJ TELESCOPIC 1.1/4″ DIA INSPEC. MIRRORRp137.000Add to cartKennedy Telescopic Mirrors – Circular
Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.
Circular Mirror
With high power magnet and pocket clip.
Mirror diameter: 30/50mm. -
ADJ TELESCOPIC 2″ DIA INSPECTION MIRRORRp185.000Add to cartKennedy Telescopic Mirrors – Circular
Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.
Circular Mirror
With high power magnet and pocket clip.
Mirror diameter: 30/50mm. -
ADJ TELESCOPIC 3-1/2″ REC. INSP. MIRRORRp193.000Add to cartKennedy Telescopic Mirrors – Rectangular
Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.
Rectangular Mirror
Mirror size: 90 x 50mm. -
ADJUSTABLE ARMS FOR HIGHBACK CHAIRRead moreChair Arms
Spare chair arms for Lincoln High Backed Operators Chair.
Supplied in pairs. -
ADJUSTABLE HOSE NOZZLERead moreAdjustable Hose Nozzle
Spray nozzle is adjusted by twisting one part of the body against the other to get the shape/strength of flow required.
-
ADJUSTABLE STRETCH WRAP DISPENSERRead moreStretch Wrap Dispenser
Mini Dispenser:
For use with 100mm x 150m stretch wrap rolls. -
ADVANCE TIMING LIGHTAdd to cartKennedy Advance Timing Light
For checking and setting ignition timing on automotive, agricultural and marine engines. Measures ignition spark advance from 0 – 60°. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 1m long removable coiled power leads. Impact resistant metal case and rubber nose cone. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides a concentrated light. Easy to apply inductive impulse pick-up. Built in check light.
-
AE16+1.5 ANVILRp312.000Add to cartIndexable Tooling Spares – Anvils
To suit threading toolholders
-
-
AFG1H03 AIRFORCE 0.53M (21″) HOLD-ON TYRE INFLATORRead moreAirforce Tyre Inflator
Clear dial display, modern, lightweight and shock resistant construction. Direct valve design increasing inflation and deflation rates. Built-in swivel and hanging device.
Conforms to BSEN 12645:1999.
Calibration type: 0 – 170ibf/in2 and 0 – 12bar.
Air inlet: 1/4â BSP. -
AFG1H06 AIRFORCE 2.70M (9′) CLIP-ON TYRE INFLATORRead moreAirforce Tyre Inflator
Clear dial display, modern, lightweight and shock resistant construction. Direct valve design increasing inflation and deflation rates. Built-in swivel and hanging device.
Conforms to BSEN 12645:1999.
Calibration type: 0 – 170ibf/in2 and 0 – 12bar.
Air inlet: 1/4â BSP. -
AFG1H08 AIRFORCE 1.8M(6′) EU CONNECT TYRE INFLATORRead moreAirforce Tyre Inflator
Clear dial display, modern, lightweight and shock resistant construction. Direct valve design increasing inflation and deflation rates. Built-in swivel and hanging device.
Conforms to BSEN 12645:1999.
Calibration type: 0 – 170ibf/in2 and 0 – 12bar.
Air inlet: 1/4â BSP.
