Archives: Products
Showing 15425–15440 of 23773 results
-
9/16″ WHIT IMPACT SOCKET1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Inch Size, Standard Length, 6-Point
1/2″ Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
9/16″ WHIT IMPACT SOCKET3/4″ SQ DRRead moreChrome Molybdenum Impact Sockets: 3/4″ Drive BSW Size, Standard Length, 6-Point
3/4″ Drive BSW Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
9/16″ WHIT SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
9/16″ WHIT SOCKET 1/2″ SQUARE DRIVERead moreYamoto Bi-Hexagon Standard Length Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
9/16″ x 11/16″ WHIT CH/VAN O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Whitworth
Whitworth
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
9/16″ x 315mm O/A HSS TAPER SHANK DRILLRead moreSherwood HSS Extra Length Taper Shank Drills, 2 Morse Taper – Inch
Series 2806, 2809, 2816, 2839, 2846, 2849 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. -
9/16″ x 5/8″ A/F CH/VAN O/END SPANNERRead moreKennedy Industrial Open Ended Spanners – AF
AF
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
9/16″ x 5/8″ A/F CH/VAN RING SPANNERRead moreKennedy Double Ended Ring Spanners – AF
AF
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
9/16″ x 5/8″ WHIT CH/VANO/END SPANNERRead moreKennedy Industrial Open Ended Spanners – Whitworth
Whitworth
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth. -
9/16″ x 5/8″WHIT CH/VAN RING SPANNERRead moreKennedy Double Ended Ring Spanners – Whitworth
Whitworth
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth. -
9/16″ x 500mm O/A HSS TAPER SHANK DRILLRead more
Sherwood HSS Extra Length Taper Shank Drills, 2 Morse Taper – Inch
Series 2806, 2809, 2816, 2839, 2846, 2849 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. -
9/16″A/F x 55mm HEX BIT SOCKET 1/2″ SQ DRRead moreScrewdriver Socket Bits, 1/2″
For insertion and removal of fasteners and fixings using 1/2″ square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to DIN standards.
-
9/16″AF SHORT RATCHET COMBINATION WRENCHRead moreKennedy Short Arm Ratchet Combination Spanners – AF
AF
Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6. -
9/16″x1/2″x13TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
9/16″x12 BSW HSS GT SPIRAL POINT TAPRead more(British Standard Whitworth) HSS Ground Thread Taps
IS0 529 – Spiral Point/Gun Nose
-
9/16″x12 BSW HSS GT STR. FLUTE PLUG TAPRead moreSherwood BSW (British Standard Whitworth) HSS Ground Thread Taps, Straight Flute Individual Sizes – Plug
ISO 529 – Straight Flute Individual Sizes – Plug
Thread Forms are Class 2 medium fit tolerance.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.