Archives: Products
Showing 15185–15200 of 23773 results
-
9.00mm x 400mm O/A HSS S/S DRILLRp562.000Add to cartHSS Extra Length Drills – Steam Tempered
General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
-
9.00mm x 400mm O/A HSS TAPER SHANK DRILLRead moreHSS Extra Length Taper Shank Drills to BS328 : 1 1986 – 1 Morse Taper, Metric
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118°, helix angle: normal, web thickness: standard, relief angle 8° – 20°, tolerance of diameter: h8. Made to BS328 : 1 1986. Sizes 32mm to 50mm are made to DIN1870/Series 1.
-
9.0M IND’ LOAD STRAP DOUBLE HOOK 4000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
9.0M IND’ LOAD STRAP DOUBLE HOOK 5000KG (2-PART)Read moreLoad Straps
Supplied as 2 pieces. The 1st strap is hooked on one end & plain on the other. The 2nd is a shorter strap with a hook on one end & ratchet on the other.
Tension is applied by looping the strap around the cargo and threading back through the ratchet.
Designed to safely secure cargo for transport.
-
9.0mm 2FL STANDARD CARBIDE SLOT DRILLRp655.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 2 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
9.0mm 2FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Metric
2 Flute: Regular Series – Metric
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
9.0mm 3FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Metric
3 Flute: Regular Series – Metric
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
9.0mm 3FL STANDARD CARBIDE SLOT DRILLRp655.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 3 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
9.0mm 4FL STANDARD CARBIDE END MILLRp936.000Read moreSherwood Milling Cutters Plain Shank Carbide Micrograin – 4 Flute
Regular Series
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080 -
9.0mm 4FL STANDARD CARBIDE END MILLRp895.000Read moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Metric
4 Flute: Regular Series – Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Metric Tolerances
Diameter: Over 1.00 ~ up to 6.00. Tolerance: +0.000, -0.050.
Diameter: Over 6.00 ~ up to 25.00. Tolerance: +0.000, -0.080. -
9.0mm CARBIDE S/S JOBBER DRILLRead moreSolid Carbide Jobber Drills
For drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118°. Tolerance of diameter: h7. Tolerance of shank: h6.
Supply unit. All diameters – 1 pce. Manufacturing Standard: DIN 338, DIN338. -
9.0mm CARBIDE S/S STUB DRILLRead moreKennedy Solid Carbide Stub Drills – Metric
Metric
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured toâDIN 6539.Tolerances:
Cutting Dia. + 0.000mm – 0.015mm.
Shank Dia. + 0.000mm – 0.030mm. -
9.0mm ST/SH SHORT 2FL CARBIDE SLOT DRILLRead moreSwissTech Carbide Plain 2 Flute Shank Milling Cutters: Series 45, Short Series – Uncoated
Series 45 – 2 Flute – Short Series
Dimensions to DIN 6535 HA. Centre cutting.Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
-
9.0mm ST/SH SHORT 3FL CARBIDE SLOT DRILLRead moreCarbide Plain Shank Milling Cutters – Series 48
3 Flute – Short Series – SDC-3PS CarbideCentre cutting. To Manufacturers Standards.
HSS-Co 8% Uncoated
For general production machining.
HSS-Co 8% TiCN Coated
Extends cutter tool life and improves work material surface finish.
HSS-Co 8% TiALN Coated
Dissipates and resists heat, reduces surface friction coupled with high surface hardness.Series 48
3 Flute – Short Series
SDC-3PS Carbide -
9.0Mx14.0M STANDARD GREEN TARPAULINRead moreStandard Duty:120gsm with standard corners.Green.Heavy Duty: 160gsm with reinforced corners.Green.
For industry, construction,agriculture, marine, domestic and recreation.Washable, shrinkproof, rotproof, tear-resistant and UV stabilised to prevent fading.Ideal ground cover for camping, hunting or fishing.Double laminated polyethylene weave with rope lined hems which are heat sealed with aluminium eyelets at 1 metre intervals.
-
9.0×1.25mm HSS GT STR. FLUTE PLUG TAPRead moreSherwood Metric Coarse HSS Ground Thread Taps, Straight Flute – Plug
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance. Straight Flute Individual Sizes IS0 529.
(1) Diameter and pitch not mentioned in ISO.